User manual CHANEY INSTRUMENT MODEL 00955 WIRELESS THERMOMETER REMOTE SENSOR

[. . . ] Note: When remote temperatures reach -12°F/-24°C or lower, bring sensor unit(s) indoors and measure temperature by placing the detachable probe out a window. Extremely cold weather can freeze the batteries and LCD panel, causing malfunctions. Temperature Ranges: Main unit: Sensor unit: 32° F-122° F/0° C-50° C -58 F-158° F/-50° C-70° C Low Battery Indicator: The low battery indicator will appear on the LCD display of both the main and sensor units. To replace the batteries, follow the set-up procedure above. [. . . ] To replace the batteries, follow the set-up procedure above. The main unit and the sensor unit have an average battery life of 6 months, depending on usage. Note: Alkaline batteries are recommended. Auto Scroll: If additional sensors are present, the auto scroll feature will display each channel's temperature for 5 seconds. To activate icon appears on the auto scroll, press the - button until the LCD display. Temperature Trend Indicator: If the temperature changes more than 1 degree in an hour, 1 of 3 temperature trend icons will appear, indicating steady, falling, and rising temperatures. Steady Falling Rising WEATHER FORECASTER SET-UP: It is important to calibrate the weather forecaster to the existing outdoor conditions for proper performance. Hold the + button on the back of the unit for 3 seconds. Select the existing weather condition by pressing the - button on the back of the unit. Press the + button to confirm the setting. Sunny Cloudy Partly Sunny Rainy Stormy THERMOMETER SET-UP: 1. Alarm Setting: Hold the clear button for 3 seconds. Press clear again and use the + or - to enter the desired minutes. Press clear again to confirm the time for the alarm. A bell icon will appear in the time panel to show that the alarm is set. To view the time the alarm is set for, press the clear button. The alarm time will display for 5 seconds and then switch back to normal clock mode. When alarm goes off, the alarm will sound for 1 minute. Each time you press the snooze button the alarm will "snooze" for ten minutes, and then sound again. To turn the alarm and snooze alarm off, press the + button. TROUBLESHOOTING: The main unit may display "---" if outside interference is occurring. Typically, the main unit will "reconnect" to the remote sensor on its own. [. . . ] To turn the alarm and snooze alarm off, press the + button. TROUBLESHOOTING: The main unit may display "---" if outside interference is occurring. Typically, the main unit will "reconnect" to the remote sensor on its own. If it doesn't, try bringing the sensor closer to the main unit. If the problem continues possible reasons include: A. [. . . ]