User manual CHANEY INSTRUMENTS ELECTRIC ALARM CLOCK MODEL 13027

[. . . ] REMEDY FOR BREACH OF THIS WARRANTY IS EXPRESSLY LIMITED TO REPAIR OR REPLACEMENT OF DEFECTIVE ITEMS. Any product which, under normal use and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by Chaney, and at its sole option, be repaired or replaced by Chaney. [. . . ] NOTE: A clear film is applied to the display at the factory that must be removed prior to using this product. Locate the clear tab and simply peel to remove. 1 · OVERVIEW OF FEATURES Chaney Customer Care 877-221-1252 Mon-Fri 8:00 a. m. CST www. chaneyinstrument. com Alarm Set Dimmer Snooze Bar PM indicator PM + Time Set Alarm OFF / ON Alarm ON indicator (Battery is Preinstalled at factory) Inelli-Time® Memory Battery Compartment TIME ZONE selection switch BOTTOM OF ALARM CLOCK -1- Daylight Saving Time Mode Selection Switch Patent numbers: 5, 978, 738; 6, 076, 044; 6, 597, 990 About Intelli-Time® Your new alarm clock is equipped with Intelli-Time technology which is pre-programmed with the correct time and date. Intellitime instructs the clock to self set itself once batteries are installed. The Intelli-Time feature requires an internal memory battery to operate correctly. This battery is located in the Intelli-Time memory battery compartment on the bottom of the clock and is pre-installed at the factory. We suggest replacement of the backup battery every 5 years. We recommend the replacement of the backup battery in 1-2 years if the unit is not powered on for a long period of time. Do not replace the memory battery unless the clock is plugged in and the display is operating with the correct time. 4 · OPERATION To set the alarm time, press AND HOLD the "alarm set" button for 3 seconds to enter into alarm time set mode. Press the "-" or "+" buttons to adjust the hour, note the PM indicator. Press the "alarm set" button to confirm hour selection and move on. Press the "-" or "+" buttons to adjust the minutes. [. . . ] Press the "time set" button again to confirm your time setting and move on to setting the calendar. Set the Month, Date, and Year in the same manner the time was set. [. . . ]