User manual CHANEY INSTRUMENTS WIRELESS WEATHER FORECASTER MODEL 75077

[. . . ] This warranty will not be breached, and Chaney will give no credit for products it manufactures which shall have received normal wear and tear, been damaged, tampered, abused, improperly installed, damaged in shipping, or repaired or altered by others than authorized representatives of Chaney. THE ABOVE-DESCRIBED WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND ALL OTHER WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. CHANEY EXPRESSLY DISCLAIMS ALL LIBILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES, WHETHER ARISING IN TORT OR BY CONTRACT FROM ANY BREACH OF THIS WARRANTY. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. [. . . ] BY ACCEPTANCE OF ANY OF CHANEY'S EQUIPMENT OR PRODUCTS, THE PURCHASER ASSUMES ALL LIABILITY FOR THE CONSEQUENCES ARISING FROM THEIR USE OR MISUSE. NO PERSON, FIRM OR CORPORATION IS AUTHORIZED TO ASSUME FOR CHANEY ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF ITS PRODUCTS. FURTHERMORE, NO PERSON, FIRM OR CORPORATION IS AUTHORIZED TO MODIFY OR WAIVE THE TERMS OF THIS PARAGRAPH, AND THE PRECEDING PARAGRAPH, UNLESS DONE IN WRITING AND SIGNED BY A DULY AUTHORIZED AGENT OF CHANEY. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. For in-warranty repair, please contact: Customer Care Department Chaney Instrument Company 965 Wells Street Lake Geneva, WI 53147 Instruction Manual Package Contents: (1) Alarm Clock (1) Instruction Manual Thank You for purchasing this ACURITE® product. This alarm clock features Intelli-Time® technology, which instantly sets the clock once the clock is plugged in. Please read this manual in it's entirety to fully enjoy the benefits and features of this product. Please keep this manual for future reference. NOTE: A clear film is applied to the display at the factory that must be removed prior to using this product. Locate the clear tab and simply peel to remove. 1 · OVERVIEW OF FEATURES Snooze Bar Alarm OFF/ON Set ALARM Dimmer LO/HI VOLUME LO/HI Adjust UP Adjust DOWN Set CLOCK ALARM ON indicator Chaney Customer Care 877-221-1252 Mon-Fri 8:00 a. m. Press the " " or " " buttons to adjust the minutes. Press the "set alarm" button to confirm and exit alarm time set mode. Alarm Clock Setting 3 · SETUP Plug the AC power cord into a 110v AC power outlet. CAUTION: To prevent electric shock, do not use this plug with an extension cord, receptacle, or any other outlet unless the blades can be fully inserted to prevent blade exposure. WARNING: To prevent fire or shock hazard, do not expose the alarm clock to rain or moisture. Alarm Clock ON or OFF TO TURN ALARM ON: slide the "Alarm on/off" switch to the right "ON" position. ALARM ON INDICATION: the display will indicate "alarm on" TO TURN ALARM OFF: slide the "Alarm on/off" switch to the left "OFF" position. Basic Clock Setup After plugging in the clock, the clock will be set to the proper time for the default time zone. Next, you will need to select your time zone for the clock to display your correct time. The time zone selection switch is located on the bottom of the alarm clock. Another preference which may need to be set depending on your location is Daylight Saving Time (DST). Certain areas do not observe DST, and you may need to disable the DST setting (OFF). The DST selection switch is located on the bottom of the alarm clock. When the alarm is sounding, you may activate the 8 minute SNOOZE function by firmly pressing down on the backlight/snooze area at the top of the alarm clock. [. . . ] The DST selection switch is located on the bottom of the alarm clock. When the alarm is sounding, you may activate the 8 minute SNOOZE function by firmly pressing down on the backlight/snooze area at the top of the alarm clock. The SNOOZE function may be activated up to 10 times. Alarm Clock SNOOZE function Dimmer LO/HI You may select dimmer LO or HI by sliding the "Dimmer" switch to the desired setting to optimize the display brightness for the location. Volume LO/HI You may select alarm volume level LO or HI by sliding the "Dimmer" switch to the desired setting to optimize the alarm volume for the location. Optional Custom Time Setting If you wish to set the clock slightly ahead or slightly behind, or if the Intelli-Time inernal memory battery is allowed to go dead, you may set the time and date simply by following the the custom setup procedure below: 1. Press AND HOLD the "clock set" button for 3 seconds, the HOUR will blink. Press the " " or " " buttons to adjust the HOUR. [. . . ]