User manual CHARTER OAK E700

[. . . ] If you move the machine after connecting the Lower Tray, be sure to carefully lift the Lower Tray with the machine because they are not fixed together. 5 Load Paper 6 A. Pull the paper cassette completely out of the machine. Adjust the paper guides at the right and rear of the paper cassette for the paper size you want. Press down on the paper to flatten it in all four corners, keeping the paper level below the guide. [. . . ] Enter your name using the dial pad and the chart below, then press Set. For more details, see Entering Text in Owner’s Manual. Press Key 2 3 4 5 6 7 8 9 once A D G J M P T W twice B E H K N Q U X three times four times five times C F I L O R V Y 2 3 4 5 6 S 8 Z A D G J M 7 T 9 For use with an external answering device. The TAD answers every call and stores voice messages. Fax messages are printed. 100% MANUAL (with an External Telephone) AUTO E. Enter the time in 24-hour format and press Set. Note: If you can’t step forward, press Stop/Exit and repeat from Step A. You control the phone line and must answer every call yourself. For more details, see Receive Mode Settings in Owner’s Manual. Note: If you can’t step forward, press Stop/Exit and repeat from Step A. Version A –1– Setting Up the MFC and PC to Work Together Before You begin • • You must set up the hardware and install the Brother Drivers before you can use your MFC as a printer and scanner in any Windows® application. Please purchase the appropriate cable if you intend to use USB. Use only a shielded parallel interface cable that is IEEE 1284-compliant and/or a USB cable that is no longer than 6 feet long (1. 8 meters). Follow the instructions in this guide for your operating system and interface. For Windows® 95/98/98SE/Me/2000 Users Step 1. Step 3. Unplug the MFC from the AC outlet and disconnect your MFC from your computer if you have already connected an interface cable. Turn on your computer. For Windows® 2000 Professional, you must be logged on as the Administrator. Insert the CD-ROM into the CD-ROM drive. 1. If you click No the Scan keys on the MFC will be disabled. Please see Note *3. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. 3. When the Digital Signature Not Found dialog boxes appear, click Yes to install the driver. 4. Click Yes to have the Control Centre loaded each time Windows® is started. The Control Centre will appear as an icon in the task tray. If you click No the Scan keys on the MFC will be disabled. Please see Note *3. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. Step 4. Step 6. For USB interface cable users Turn on the MFC by plugging in the power cord. Connect the Filter Core and Cable Tie to the USB cable, and then connect the MFC to your PC with the USB cable. (It will take a few seconds for the installation screen to appear. ) The installation of the Brother driver will automatically start. Follow the instructions on the screen. ( For Windows® 98/98SE/Me Users ) ( For Windows® 2000 Users ) 1. In the Add Printer Wizard window, select BRUSB: USB Printer Port, and then click Next. 2. Accept the default Printer name by selecting Yes, and then click Next. 3. Select Yes (recommended), and then click Finish. A test page will be printed so you can check the print quality. 1. When the Digital Signature Not Found dialog boxes appear, click Yes to install the driver. 4. If the test page is printed correctly, click Yes. If you click No, follow the prompts on the screen to correct the problem. 5. Select Yes to restart your computer, and then click Finish. 6. Click Yes to have the Control Centre loaded each time Windows® is started. [. . . ] B. Connect the MFC to your PC with the Parallel Cable. (Same step as Windows 95/98/98SE/Me/2000 Users Step 3. , 1-11) Connect the parallel interface cable to the parallel interface port of the MFC and secure the wire clips. Connect the interface cable to the printer port of the computer and secure it with the two screws. For the location of your computer’s parallel printer port, see the User’s Guide for your computer. 13. [. . . ]