User manual CHARTER OAK SA538

[. . . ] Setup You can view the Wireless Setup Wizard which guides you through the print server configuration. You can also install the printer driver and BRAdmin Professional utility. 2 4 Loosen the two screws, and then remove the network cover plate. 3 English 5 Put the NC-7100w print server connector firmly into the connector of the main controller board by aligning the two screws to the groove of the printer, and then secure it with the two screws. [. . . ] See Other Information in this Quick Setup Guide for information how to reset to factory default setting. 3 Refer to Chapter 10 of the NC-7100w Network User’s Guide on the CD-ROM we have supplied with NC-7100w. Click the Network tab to see the available wireless devices. You can see the Brother wireless print server in the Network option. Continue to Step 3 6 If the Brother wireless print server you want to choose is not listed, follow these steps: 1 Move your printer with the wireless print server installed closer to your PC, or reorient the print server and try again. 2 Reset the print server back to its default factory setting and try again. See Other Information in this Quick Setup Guide for information how to reset to factory default setting. 3 Refer to Chapter 10 of the NC-7100w Network User’s Guide on the CD-ROM we have supplied with NC-7100w. Step 3 Configuring the Print Server 1 Insert the CD-ROM into your CD-ROM drive. 3 users) Double-click the NC7100w icon on your Macintosh®, and then double-click the Start Here icon. 5 Review the Welcome information and when you are sure you have completed the necessary tasks, click Next. WEP By using WEP (Wired Equivalent Privacy), the data is transmitted and received with a secured key. €71f2234ab56cd709e5412aa3ba” 11 Click Next to submit the settings to the NC-7100w. 9 English 12 When the Setup Complete screen appears , click Next. Step 4 Installing the Printer Driver and Network Print Software You need to install the printer driver and network print software, and configure it for the wireless network connection of the printer. 3 users) If you already have the printer driver installed in your computer, go to Step 3. 13 Using the information you recorded in Step 2, return the wireless settings of your computer back to their original settings. 2 You can also configure the NC-7100w from the control panel of the printer, or using the BRAdmin utilities or a web browser. See Appendix B of the NC-7100w Network User’s Guide for more details. (For Windows® users) Refer to P19 to P23 ot the Printer Quick Setup Guide for the rest of the steps. For Windows® users: Setup is now complete. Open the Utilities folder, and then open the Print Center icon. [. . . ] Consult the dealer or an experienced radio/TV technician for help. important Changes or modifications not expressly approved by Brother Industries , Ltd. Could void the user's authority to operate the equipment. , 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan Herewith declare that: Products description:Network Card Product Name:NC-7100w are in conformity with provisions of the Directives applied: Low Voltage Directive 73/23/EEC (as amended by 93/68/EEC) and the Electromagnetic Compatibility Directive 89/336/EEC (as amended by 91/263/EEC and 92/31/EEC and 93/68/EEC). [. . . ]