User manual CHERRY MULTIBOARD G81-8043

[. . . ] 3 Follow the installation instructions on the screen. 3. 1 Cherry Tools The following functions are supported: · Programming of keys · Configuration of the keyboard · Activation and configuration of the magnetic card reader 1 · · · · · · · · Advantages of the keyboards Cherry FTSC key technology Robust and reliable Programmable keys Magnetic card reader (G81-7040/-8040 only) EMV 2000-approved PC/SC chip card reader OPOS and JavaPOS support Client/server support Cherry Tools software for programming and configuration 3. 2 Cherry Tools Runtime Distributes existing configurations to other systems (e. g. keyboard and magnetic card settings. ) No additional applications are installed beside the drivers required for operation. Read the installation instructions on the accompanying CD-ROM. 3. 3 Cherry OPOS/JavaPOS support If you use applications which access the keyboard or magnetic card reader via OPOS or JavaPOS: Windows operating system Install the Cherry OPOS Support or Cherry JPOS Support software. Linux operating system Use the installation scripts for JavaPOS support on the CD-ROM in the Software\JavaPOS\Linux directory. 1. 1 Status indicators The left and center LEDs show the status of the locked-key function of the Num and Caps keys. [. . . ] After a discernable pressure point has been passed, contact takes place. 7 RSI syndrome 5 Magnetic card reader (G81-7040/8040 only) RSI syndrome RSI stands for "Repetitive Strain Injury". RSI arises due to small movements continuously repeated over a long period of time. Typical symptoms are discomfort in the fingers or neck. 1 Set up your workspace for maximum ergonomic benefit. 2 Change the angle of the keyboard using the rear supports. 3 Take several short breaks, with stretching exercises if necessary. 4 Change the position of your body often. The functions of the magnetic card reader are available when one of the following Cherry software packages has been installed: · Cherry Tools · Cherry Tools Runtime · Cherry OPOS support · Cherry JavaPOS support for Windows · Cherry JavaPOS support for Linux The magnetic card reader is able to read the tracks individually, in pairs or all at once. Decoding of the read data is carried out via software. Definition of header and terminator: · Header and terminator identify the start and end of the transfer of magnetic card data. The header/terminator code is inserted before/after the actual magnetic card data. 8 Disposal Dispose of the old unit via a collecting point for electronic scrap or via your dealer. 2 9 Technical data 10 Contact Cherry GmbH Cherrystraße 91275 Auerbach Germany www. cherry. de/advanced Sales: Tel. : +49 (0) 1805 243779 (01805 CHERRY), (0. 12 /min. ) E-mail: sales@cherry. de Technical support: Tel. : +49 (0) 1805 919108 (0. 12 /min. ) E-mail: support@cherry. de Please have the following information on hand when contacting technical support: · Item and serial no. of the product · Name and manufacturer of your PC/notebook or motherboard · Operating system and, if applicable, installed service pack version 9. 1 Keyboard Description Interface Power supply Current consumption Storage temperature range Operating temperature range Value USB plug +5 V/DC ±5 % SELV max. 300 mA ­20 °C to +60 °C 0 °C to +50 °C 9. 2 Magnetic card reader (G81-7040/-8040 only) Description Tracks Reading speed Value two or three 3 to 125 inch/s at 75 bits/inch, 3 to 50 inch/s at 210 bits/ inch ISO 7811/-12, AAMVA, JIS 1 up to 1, 000, 000 11 General advice Cherry continuously optimizes products as new technologies are developed. For this reason we reserve the right to make technical alterations. The evaluation of product reliability and the definition of the product's technical performance are carried out according to Cherry's own requirements in order to meet internationally recognized regulations and standards. Requirements in addition to these can be met through mutual cooperation. Improper usage, handling, storage and external influences could lead to faults and defects during use. We do not accept warranty for defects caused by alterations to our product by the user and shall not be held liable for unauthorized modifications. All repairs must be made by Cherry or an officially appointed organization or persons. [. . . ] A keyboard with non-German key button assignment is not to be used on a long-term basis at computer workplaces in Germany in view of the character assignment (DIN 2137, Part 2). 12. 5 VCCI-Statement 12. 3 Federal Communications Commission (FCC) Radio Frequency Interference Statement Information to the user: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]