User manual CHERRY POWER WHEELMOUSE,M-2000

[. . . ] Requirements outside of these can be reached through mutual co-operation. Improper usage, handling, storage and external influences could lead to disturbances and defects during use. We do not grant or warrant any alterations to our product by the user in any capacity and do not accept any liability for unauthorized modifications. All repairs must be made by Cherry or an officially appointed organisation or persons. [. . . ] To set the double-click speed 1 Position the mouse pointer on the slider in the group Double-click speed. 2 Press the left mouse button and pull the slider to the desired position. To configure the mouse for a left-hander 1 In the groupe Button combination, activate the button Left-hand mode. The new configuration is saved. 3. 2 Pointers (tab) In the tab Pointers, you can change the display of the mouse pointer. This enables you to assign an individual appearance to the different functions of the mouse pointer. To change the display of the pointer 1 Mark the function of the mouse pointer that you wish to change in the list. 3 Choose the mouse pointer that you wish to use for the selected function. The tab Pointers moves into the fore- 3 ground. The chosen mouse pointer appears in the list under the selected function. The new configuration is saved. Click on the button OK. To set the locating of the pointer 1 In the group Locating, activate the control box On pressing CTRL, show pointer position. The new configuration is saved. 3. 3 Motion (tab) In the tab Motion you can make the following settings: · You can set the speed at which the pointer travels across the screen. · You can determine that the cursor automatically jumps to the standard button in each new dialog box. · You can set that the position of the pointer can be located. When you press the Ctrl key, a circle blinks around the pointer. To set the pointer speed 1 Position the mouse pointer on the slider in the group Pointer speed. 2 Press the left mouse button and pull the slider to the desired position. To direct the pointer to the standard button 1 In the group Direct to button, select the control box Move cursor automatically to standard button. - OR - 3. 4 Settings (tab) In the tab Settings you can make the following settings: · You can compile an individual NetJump menu. In this menu, symbols are grouped that assist you in the operation of an Internet browser. In the tab Buttons you can determine which mouse button activates the NetJump menu by assigning the NetJump menu to a button. · You can compile an individual LuckyJump menu. [. . . ] To change the roll direction of the wheel 1 In the group Wheel, activate the control box Reverse roll direction. To set that each wheel turn scrolls x lines 1 In the group Wheel, activate the control box Scrolling. 2 In the spin box Lines at a time, enter the number of lines that are to be scrolled when the mouse wheel is turned once. So set that a page is scrolled per wheel turn 1 In the group Wheel, activate the control box Scroll one page per scroll unit. [. . . ]