User manual CHEVROLET CORVETTE ZR1 2010

[. . . ] 2010 Chevrolet Corvette Owner Manual M In Brief . 3-19 Starting and Operating Your Vehicle . 3-21 3-39 3-42 3-50 3-54 3-59 Instrument Panel . 4-22 Warning Lights, Gauges, and Indicators . [. . . ] . When the mode you want is selected, press the OPTION button to set your choice and advance to the next personal option. Personalize Name : This option allows you to type in a name or greeting that will appear on the DIC display whenever the corresponding keyless access transmitter (1 or 2) is used or one of the memory buttons (1 or 2) located on the driver's door is pressed. Press the OPTION button until PERSONALIZE NAME appears on the display, then press the RESET button to scroll through the following modes: . . YES NO (default) ENGLISH (default) DEUTSCH (German) FRANCAIS (French) ITALIANO (Italian) ESPANOL (Spanish) If you choose YES, you can type in a name that will appear on the DIC display. To program a name, use the following procedure: 1. Enter the PERSONAL OPTIONS menu and select the driver number (1 or 2) that you would like to program by following the instructions listed previously under "Entering the Personal Options Menu". Press the OPTION button until the PERSONALIZE NAME option appears on the display. Select YES under PERSONALIZE NAME by pressing the RESET button. If you choose a language that you do not understand, press the OPTION and RESET buttons for five seconds. The DIC will begin displaying all of the various languages one by one for as long as the buttons are pressed. When the desired language is displayed, release the buttons and the DIC will set to this language. Press the OPTION button and a cursor will display where you can insert a letter. Press the OPTION button again until the letter you want is displayed. To scroll through the letters faster and without a beeping noise, keep the OPTIONS button depressed. There are alpha/ numeric characters and a blank space available. Then press the RESET button to select the letter of your choice and proceed on to the next space to the right. If you make a mistake and would like to clear or replace a letter, perform the following steps: 6. Press the RESET button to reach the letter you would like to change. Press the OPTION button to scroll through the letter choices. Press the RESET button to select the letter and proceed on to the next space to the right. 7. Repeat Steps 5 and 6 until the name or greeting you want is complete. After the name or greeting is complete, keep pressing the RESET button until the display turns blank and exits out of this option. If you choose NO, this option will turn off. [. . . ] 4-81 Radios Navigation/Radio System, see Navigation Manual . 3-51 Rearview Mirrors Automatic Dimming . . 2-6 Recommended Fluids and Lubricants . 5-33 Reimbursement Program, GM Mobility . [. . . ]