User manual CHEVROLET SUBURBAN 2009

[. . . ] 2009 Chevrolet Tahoe, Suburban Owner Manual Seats and Restraint System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Head Restraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Front Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Rear Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Start the Pairing process on the cell phone that will be paired to the vehicle. Reference the cell phone manufacturers user guide for information on this process. Locate the device named "General Motors" in the list on the cellular phone and follow the instructions on the cell phone to enter the four digit PIN number that was provided in Step 3. The system prompts for a name for the phone. Use a name that best describes the phone. This name will be used to indicate which phone is connected. The system then confirms the name provided. The system responds with "<Phone name> has been successfully paired" after the pairing process is complete. Repeat Steps 1 through 7 for additional phones to be paired. · Up to five cell phones can be paired to the in-vehicle Bluetooth system. · The pairing process is disabled when the vehicle is moving. · The in-vehicle Bluetooth system automatically links with the first available paired cell phone in the order the phone was paired. · Only one paired cell phone can be connected to the in-vehicle Bluetooth system at a time. · Pairing should only need to be completed once, unless changes to the pairing information have been made or the phone is deleted. To link to a different paired phone, see Linking to a Different Phone later in this section. 3-117 Listing All Paired and Connected Phones 1. The system responds with "Ready" followed by a tone. The system responds with "Bluetooth ready" followed by a tone. The system lists all the paired Bluetooth devices. If a phone is connected to the vehicle, the system will say "Is connected" after the connected phone. Linking to a Different Phone 1. The system responds with "Ready" followed by a tone. The system responds with "Bluetooth ready" followed by a tone. The system responds with "Please wait while I search for other phones". · If another phone is found, the response will be "<Phone name> is now connected". Deleting a Paired Phone 1. The system responds with "Ready" followed by a tone. The system responds with "Bluetooth ready" followed by a tone. The system asks which phone to delete followed by a tone. Say the name of the phone to be deleted. If the phone name is unknown, use the "List" command for a list of all paired phones. [. . . ] 2-21 Voltmeter Gage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-39 15 W Warning Lights, Gages, and Indicators . . . . . . . . . . . . . . . 3-34 Warnings DIC Warnings and Messages . . . . . . . . . . . . . . . . . . . . . . . . 3-64 Hazard Flashers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]