User manual CHICAGO 1703

[. . . ] Watch what you are doing, and use common sense when operating a power tool. Do not use this product while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating this product may result in serious personal injury. Keep your hair, clothing, and gloves away from moving parts. [. . . ] Follow instructions in the "Inspection, Maintenance, And Cleaning" section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of personal injury. SKU 1703 For technical questions, please call 1-800-444-3353. Page 3 SPECIFIC SAFETY RULES 1. Maintain labels and nameplates on this product. If unreadable or missing, contact Harbor Freight Tools for a replacement. When using the Grease Gun, always maintain a firm grip on the tool with both hands. Keep the outer body of the Grease Gun dry, clean, and free from oil and grease. Industrial applications must follow OSHA requirements. Make sure to read and understand all instructions and safety precautions as outlined in the manufacturer's manual for the vehicle (or object) you are lubricating. This Grease Gun is designed only to hold and dispense grease. Never use the Grease Gun to hold and dispense any other material. The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. 6. 7. SAVE THESE INSTRUCTIONS CARTRIDGE LEVER BARREL RELEASE LATCH SUCTION FILLING PLUNGER ROD GUN HEAD CARTRIDGE FILLING FILLER PUMP FILLING Because of continuing improvements, actual product may differ slightly from illustrations. SKU 1703 For technical questions, please call 1-800-444-3353. Page 4 FILLING THE GREASE GUN Installing A Grease Cartridge 1. Unscrew and remove the head of the grease gun from the barrel. Pull the Plunger Rod all the way back and ensure it is locked in place. Remove both ends from a 14 ounce grease cartridge (not included), and insert the cartridge into the Barrel in the direction indicated on the cartridge. Depress the Release Latch, and push the Plunger Rod all the way forward as far as it will go. Suction Filling 1. Unscrew and remove the Head from the Barrel. Insert the open end of the Barrel into the lubricant. Slowly pull the Plunger Rod back while pushing the Barrel deeper into the lubricant to prevent air pockets from being pulled into the Barrel. When the Plunger Rod is fully extended, remove the Barrel from the lubricant. Wipe the exterior of the Barrel clean of lubricant. [. . . ] 5. INSPECTION, MAINTENANCE, AND CLEANING 1. Before each use, inspect the general condition of the Grease Gun. Check for misalignment or binding of moving parts, cracked or broken parts, leaking connections, and any other condition that may affect its safe operation. If a problem occurs, have the problem corrected before further use. [. . . ]