User manual CHICAGO 3223

[. . . ] Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children. [. . . ] Do not operate tool if under the influence of alcohol or drugs. Read warning labels if taking prescription medicine to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool. Use proper size and type extension cord. If an extension cord is required, it must be of the proper size and type to supply the correct current to the tool without heating up. Otherwise, the extension cord could melt and catch fire, or cause electrical damage to the tool. This tool requires use of an extension cord with up to 20 amps capability (up to 50 feet), with wire size rated at 10 AWG. Longer extension cords require larger size wire. If you are using the tool outdoors, use an extension cord rated for outdoor use (signified by "WA" on the jacket). For your safety, service and maintenance should be performed regularly by a qualified technician. People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. This Stud Welder requires the use of both hands when operating. This helps maintain tool stability and keeps hands away from the working area of the tool. For technical questions, please call 1-800-444-3353. Do not touch the welded stud electrode or work surface until it cools. Unplug the Stud Welder while inserting the stud electrode into the Stud Welder. Do not operate the Stud Welder with its protective case removed. Do not touch grounded surfaces while operating. Welding/Plasma Cutting Produces toxIC fumes and gasses. exposure to welding or cutting gasses can increase the risk of developing certain cancers, such as cancer of the larynx and lung cancer. also, some diseases that may be linked to exposure to welding or plasma cutting gasses or fumes are: · early onset of Parkinson's Disease · Heart Disease · Damage to the reproductive organs · ulcers · Inflammationofthesmallintestineorstomach · Kidney damage · Respiratory diseases such as emphysema, bronchitis or pneumonia safety precautions, such as using natural or forced air ventilation and wearing an aNsI approved respirator, are esseNtIal to reduce the risk of developing the above illnesses. Inhalation Hazard Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Note: Performance of this tool may vary depending on variations in local line voltage. [. . . ] 25 26 27 28 29 30 31 32 33 Description Nut, Brass, 5/16-18 Insulator Sleeve 100 pcs. 4mm studs Slide Hammer Washer, Split Lock, 5/16" Terminal, Closed End Wire Assembly, flag / spade Wire Assembly, flag / bare Electrode Assembly Spring, Sliding Electrode Sliding Electrode 2mm electrode 3mm electrode 4mm electrode Screw, hex head cap, 1/4x20x5/8" Insulator, FRP Circuit Breaker, 120 VAC Screw, Roundhead, 10-32x7/8" Trigger Boot Trigger Switch Line Cord, 120 VAC Case, Left Nut, hex, 10-32 Insulator, Nomex Transformer, 120 VAC Screw, hex head cap, 1/4x20x3/4" Washer, flat SAE 1/4" Case, right Screw, round head, 10-32x1-3/4" Strap, Braided Washer, Split Lock, 1/4" Nut, hex, 1/4x20 Washer, Flat brass, 5/16" Nut Transformer Assembly Qty 2 1 3 bags 1 1 2 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 8 1 1 1 4 1 6 1 2 2 2 1 1 NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. [. . . ]