User manual CHICAGO 34313

[. . . ] READ ALL INSTRUCTIONS BEFORE USING ThIS TOOL!Do not use machines or power tools in damp, wet, or poorly lit locations. Do not use electrically powered tools in the presence of flammable gases or liquids. Children must never be allowed in the work area. [. . . ] Be sure the switch is in the OFF position when not in use and before plugging in. Do not carry any tool with your finger on the trigger, whether it is plugged in or not. When the equipment is operated outdoors, use only extension cords intended for outside use. See chart under "Extension Cords" for the proper AWG rating depending on the length of the cord(s) being used. Watch what you are doing; use common sense. Do not operate any tool when you are tired. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn on and off properly. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerator enclosures. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. DO NOT OPERATE TOOL IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool. Page 3 -- SKU: 34313 REV 02i UNPACKING If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. Ref A N/A B C1 C2 D Item Description Receiver Mounting Bar Hardware Bag Detachable Side Rail Side Rail Brace Side Rail Brace Bed Frame Quantity 1 1 2 3 3 1 Caution: Be aware of the possible risk of fire and damage to property resulting from the ve- hicle's exhaust pipe pointing at the cargo put in this Cargo Carrier. Before installing the Cargo Carrier, check to make sure that the exhaust pipe is not pointing in the direction of the cargo. Flammable cargo can ignite from exposure to heat. Other cargo can be damaged from the heat. [. . . ] Doing so can result in personal injury and/or damage to the product. If the vehicle hits a bump, a slight play in the receiving hitch or a movement in the load could result in a momentary dynamic loading effect that could dramatically increase the actual load weight. This momentary dynamic loading effect could result in damage to the Excess Cargo Carrier, damage to the load and possible personal injury. requires a Class 3 hitch on the vehicle. [. . . ]