User manual CHICAGO 39168

[. . . ] Item 39168 truck extender Assembly and Operating Instructions 3491 Mission Oaks Blvd. , Camarillo, CA 93011 Copyright© 1998 by Harbor Freight Tools®. No portion of this instruction sheet or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight tools. For technical questions and replacement parts, please call 1-800-444-3353. Thank you for choosing a Harbor Freight Tools product! [. . . ] the truck extender includes tie down loops. When unpacking the Truck Extender, make sure all parts shown on the Parts Diagram on the back of this sheet are included and in good condition. If any part is missing or damaged, contact Harbor Freight Tools at the telephone number shown above. ReV 08e Warning: 1. Read this instruction sheet completely before attempting to assemble and use the Truck Extender. Always wear ANSI approved safety goggles when assembling and working with tools and equipment. the maximum load capacity for the truck extender is 350 Lbs. Only use the Truck Extender with a Class 3 truck receiver hitch. Do not modify the Truck Extender in any way. Before each use, check all hardware for tightness and make sure that both "L" pins and both "R" pins are correctly in place. Always use tie down loops to properly secure the extended load and use warning signs (not included) to alert other vehicles. Note: The warnings and instructions contained in this instruction sheet cannot cover all possible conditions and situations that may occur when using this product. It must be understood that common sense and caution are factors which cannot be built into this product. These factors must be supplied by the person using the Truck Extender. Assembly and Use of the truck extender The Truck Extender can easily be assembled by understanding the instructions shown below. [. . . ] The Truck Extender is now ready for use. 2. 3. 4. PARtS LISt Part 1 2 3 Description Top Extender "T" Extender "L" Extender Ref. [. . . ]