User manual CHICAGO 46149

[. . . ] CAuTION, without the safety alert symbol, is used to address practices not related to personal injury. Safety Alert Symbol and Signal Words In this manual, on the labeling, and all other information provided with this product: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. dANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. [. . . ] ALLOW OIL TO BE EXTRACTEd TO COOL dOWN TO BETWEEN 70-80° F BEFORE EXTRACTING OIL. CLOSE BALL VALVE (4) BEFORE pRESSuRIZATION. Do not attempt to pressurize Tank (1) with Ball Valve open. IF uSEd OIL dOES NOT EVACuATE TANK (1) upON Page 3 9. 10. Do not use this equipment when you are tired or distracted from the job at hand. Before using this product, carefully check that it will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect the operation of this product. Replace or repair damaged or worn parts immediately. Keep this product clean and dry for better and safer performance. mAINTENANCE: For your safety, service and maintenance should be performed regularly by a qualified technician. uSE THE RIGHT pROduCT FOR THE RIGHT jOB. There are certain SKU 46149 2. 3. 4. 5. 6. For technical questions, please call 1-800-444-3353. pRESSuRIZATION, check to make sure the Ball Valve (4) is fully closed (with its Handle in the horizontal position). If this does not correct the problem remove the unit from service immediately and have it repaired by a qualified repair service technician. dISCONNECT AIR SuppLY AFTER EVACuATING OIL. uSE ONLY THE HOSE/NOZZLE ASSEmBLY (5) pROVIdEd. Do not attempt to modify the Hose/Nozzle Assembly in any way. THE AIR RELEASE VALVE HAS BEEN pRE-INSTALLEd ANd pRESET TO OpERATE AT 70-110 pSI. Do not tamper with or remove. SpECIFICATIONS Tank Reservoir Size Maximum Oil Level Maximum extraction rate Air Inlet Working Air Pressure Min/Max. Oil Temperature Oil Extractor Probes (Total Qty = 5) 6-1/4 Gallons 4-1/4 Gallons 1/2 GPM 1/4" NPT 70-110 PSI 68-158° F 1/4" x 27-1/2" Long, Nylon 5/16" x 27-1/2" Long, Nylon 5/16" x 39-1/4" Long, Nylon 1/4" x 27-1/2" Copper 9/32" x 27-1/2" Copper 9. uNpACKING When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible. 10. dO NOT dRAIN CAuSTIC OR FLAmmABLE pROduCTS. Do not expose tank to heat or any ignition source. [. . . ] THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 46149 For technical questions, please call 1-800-444-3353. Page 7 LImITEd 90 dAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. [. . . ]