User manual CHICAGO 46389

[. . . ] Cluttered, damp or wet work areas invite injuries. SKU 46389 PAGE 2 2. KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle this product. When not in use, tools and equipment should be stored in a dry location to inhibit rust. Always lock up tools and equipment and keep out of reach of children. [. . . ] Check for damaged parts and any other conditions that may affect the operation of this product. Replace or repair damaged or worn parts immediately. When servicing, use only identical replacement parts. Only use accessories intended for use with this product. Approved accessories are available from Harbor Freight Tools. Keep this tool clean and dry for better and safer performance. MAINTENANCE: For your safety, service and maintenance should be performed regularly by a qualified technician. 8. 9. 10. 11. 12. 13. SKU 46389 14. USE THE RIGHT PRODUCT FOR THE RIGHT JOB. There are certain applications for which this product was designed. Do not use small equipment, tools or attachments to do the work of larger industrial equipment, tools or attachments. Do not use this product for a purpose for which it was not intended. PRIOR TO USING THIS PRODUCT, MAKE SURE TO READ AND UNDERSTAND ALL INSTRUCTIONS AND SAFETY PRECAUTIONS AS OUTLINED IN THE VEHICLES MANUFACTURER'S MANUALS. NEVER WORK UNDERNEATH A VEHICLE WITHOUT USING ADDITIONAL SAFETY SUPPORT DEVICES (I. E. , JACK STANDS) TO SUPPORT THE WEIGHT OF THE VEHICLE. Read and understand all safety warnings and instructions provided in the instruction manual of the vehicle as well as the jack stand being used to support the vehicle. WARNING: This product contains or produces a chemical known to the State of California to cause cancer and birth defects (or other reproductive harm). (California Health & Safety Code 25249. 5 et seq. ) 15. 16. 17. UNPACKING When unpacking, check to make sure the parts shown on page 10 of this manual are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. OPERATING INSTRUCTIONS Note: All parts mentioned below refer to the parts listed and shown on page 10 of this manual. NOTE: This Master Ball Joint Adapter Set is intended for use with the 3-In-1 Service Kit (Model 38335), which is available from Harbor Freight Tools. Read and understand all safety warnings and instructions provided in the instruction manual of the 3-In-1 Service Kit before using the kit. To Attach The Plug Bolt To The C-Frame: 1. [. . . ] Mount the Remover/Installer (part #13) on the Forcing Screw assembly so that the larger diameter portion of the Remover/Installer faces the threaded hole of the C-Frame, and the smaller diameter portion faces the unthreaded side of the ball joint. 3. SKU 46389 RECEIVER TUBE (#1, #2, #3, #4, #5, #6, #10, #11) REMOVER/INSTALLER (#13) PLUG BOLT (#14) FORCING SCREW C-FRAME FIGURE B 4. Mount the proper size Receiver Tube (parts #1, #2, #3, #4, #5, #6, #10, #11) over the threaded side of the ball joint. Diagram. ) Align the mounted Remover/Installer (part #13), ball joint, and Reciever Tube (parts #1, #2, #3, #4, #5, #6, #10, #11) to allow removal of the ball joint. [. . . ]