User manual CHICAGO 65057

[. . . ] 36W/110V Hot Blade decal RemoVeR 65057 Set up and opeRating inStRuctionS distributed exclusively by Harbor Freight tools®. 3491 Mission Oaks Blvd. , Camarillo, CA 93011 Visit our website at: http://www. harborfreight. com Read this material before using this product. Failure to do so can result in serious injury. SaVe tHiS manual. Copyright© 2008 by Harbor Freight Tools®. [. . . ] use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. 3. Do not lay the tool down on any flammable surface. When using a handheld power tool, maintain a firm grip on the tool with both hands. Do not leave the tool unattended when it is plugged into an electrical outlet. Turn off the tool by unplugging it from its electrical outlet before leaving. WARNING: Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. (California Health & Safety Code § 25249. 5, et seq. ) 4. 5. 6. Allow to cool before putting on or taking off parts. Do not operate the appliance near draperies, curtains, and walls. These flammable materials may catch fire from this electric appliance. Provide adequate ventilation space on all sides of the appliance, especially near vents. Inadequate ventilation may cause fire or damage to the appliance. decal Remover Safety Warnings 1. Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Prepare to begin work before turning on the tool. 4. 2. SKU 65057 For technical questions, please call 1-800-444-3353. Page 4 5. Keep multiple ABC class fire extinguishers nearby. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. grounded tools: tools with three prong plugs 6. SaVe tHeSe inStRuctionS. gRounding to pReVent electRic SHocK and deatH FRom incoRRect gRounding WiRe connection: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. [. . . ] As soon as the tool has heated, it is ready for use. Keep the tool away from any flammable surface or material. Holding the tool by the handle, apply the heated blade to the edge of a decal, pinstripe, sticker or similar item. For most effective removal, slowly work the blade under the decal. [. . . ]