User manual CHICAGO 65834

[. . . ] BATTERY CHARGER WITH LCD DISPLAY 65834 SET uP AnD OPERATInG InSTRuCTIOnS Distributed exclusively by Harbor Freight Tools®. 3491 Mission Oaks Blvd. , Camarillo, CA 93011 Visit our website at: http://www. harborfreight. com Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS mAnuAL. Copyright© 2008 by Harbor Freight Tools®. [. . . ] Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. In addition, people with pacemakers should: SKU 65834 For technical questions, please call 1-800-444-3353. Page 4 GROunDInG TO PREVEnT ELECTRIC SHOCK 3. AnD DEATH FROm InCORRECT GROunDInG WIRE COnnECTIOn: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the Power Cord Plug provided with the Battery Charger. Do not use the Battery Charger if the Power Cord or Plug is damaged. If damaged, have it repaired by a service facility before use. If the Plug will not fit the outlet, have a proper outlet installed by a qualified electrician. "live" terminal. (See 3-Prong Plug and Outlet. ) The tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the preceding illustration. (See 3-Prong Plug and Outlet. ) 3-PROnG PLuG & OuTLET Grounded Tools. Tools marked with "Grounding Required" have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of electric shock. (See 3-Prong Plug and Outlet. ) ExTEnSIOn CORDS 1. Grounded tools require a three wire extension cord. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and possible tool damage. (See Table A. ) The smaller the gauge number of the wire, the greater the capacity of the cord. For example, a 14 gauge cord can carry a higher current than a 16 gauge cord. (See Table A. ) When using more than one extension cord to make up the total length, make sure each cord contains at Page 5 3. 2. The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. must be the only wire connected to the tool's grounding system and must never be attached to an electrically SKU 65834 For technical questions, please call 1-800-444-3353. least the minimum wire size required. [. . . ] (6V battery is less than 5. 2V; 12V battery is less than 10. 5V) 4. The battery is damaged. Possible Solutions 1. If the battery is deeply discharged, wait for a while until it automatically turns back above 5. 2V for a 6V battery or above 10. 5V for a 12V battery. If the battery is in low voltage status for a long time, then it is possibly damaged and needs to be replaced with a new battery. [. . . ]