User manual CHICAGO 66186

[. . . ] warning indicates a hazardous situation which, if not avoided, could result in death or serious injury. cauTiOn, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. nOTice is used to address practices not related to personal injury. cauTiOn, without the safety alert symbol, is used to address practices not related to personal injury. SaFeTY ruLeS warning! [. . . ] If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. SKU 66186 For technical questions, please call 1-800-444-3353. Page 3 SpeciFicaTiOnS Electrical Requirements LED Types Connector 12VDC Amber and Red 4-way Flat wiring note: Some towing vehicles may already have a 4-way Flat Connector, "Trunk" plug wired in. For those vehicles, skip the following wiring instructions. if you do not have experience doing this type of automotive electrical wiring or if the wiring in your vehicle differs from that explained below, have an automotive service technician connect the wiring. Identify the towing vehicle's wires in the trunk that correspond to the circuits indicated in the Wiring Color Code diagram to the right. The white ground wire from the Pigtail (22) may be connected to a bolt or appropriate component on the vehicle to establish a ground instead of a ground wire. wiring color code note: This is the wiring configuration of the "Trunk" 4-way Flat Connector (23). The towing vehicle may have a different wiring color code. "Trunk" 4-way Flat connector (23) whiTe Ground BrOwn Running Lights YeLLOw Left Stop and Turn Lights green Right Stop and Turn Lights wiring pigtail (22) 2. Connect the wires from the Wiring Pigtail (22) to the proper vehicle circuit wires using Wire Splices (21). No stripping or cutting is usually required to connect wires using the included Splices. Follow these three steps and refer to the illustration to the right: a. Insert the end of the Pigtail (22) wire into the `dead-end' channel of the Splice. Insert the wire all the way to the end of the channel as shown. Place the Splice around the correct vehicle circuit wire. Make sure both wires stay properly in place while the cover is closed until it snaps together. wire Splice (21) usage a) insert pigtail (22) wire into `dead-end' channel c) close Splice cover securely 3. Verify that all wires are held securely. B) place splice around vehicle wire SKU 66186 For technical questions, please call 1-800-444-3353. Page 4 4. 5. Plug the "Trunk" Connector (23) into the "Trailer" Connector (18). if the wire Splices (21) are used improperly and damage the vehicle's wiring, the vehicles rear lights may fail, resulting in a traffic hazard. have an assistant operate the vehicle's lights while you carefully check that the vehicle lights and the towing lights all work properly after installation. If any function of the vehicle or towing lights does not work, do not drive the vehicle. Carefully inspect the splice connection and the circuit that failed and repair the problem and retest before use. Disconnect the "Trailer" Connector (18) if the light kit is not going to be used yet. 6. SeT up 1. To help avoid scratches, clean the mounting locations and clean the protective labels under the lights. Set the lights on the back of the vehicle being towed so that the RED side of each light faces backwards. Set the light that has a green wire on the right side and the light that does not have a green wire on the left side. [. . . ] Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. [. . . ]