User manual CHICAGO 66260

[. . . ] Keep assembly area clean and well lit. unpackIng When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this document as soon as possible. 2. 6. Keep bystanders out of the area during assembly. [. . . ] 3. ) Put the 6" vise, or any size vise with mounting holes that align properly with the Vise Mounting Holes (4), on top of the Vise Mount Plate (3) in the desired orientation. Mounting Bolts (6) Vise Mount Plate (3) operatIon 1. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly and use. Angled End of Receiver Retaining Pin (5) Receiver Retaining Pin (5) 2. Receiver Tube (1) Hairpin Clip (2) Vise Mounting Holes (4) Fig. Pull out the Hairpin Clip (2) and slide out the Receiver Retaining Pin (5). 3 Align up the holes in the vise with those in the Vise Mounting Plate. 3. ) SKU 66260 For technical questions, please call 1-800-444-3353. Page 2 4. Secure the vise to the Vise Mount Plate (3). Slide a Flat Washer (7) onto a Mounting Bolt (6) b. Drop the Bolt/Washer assembly down through the hole in the vise and through the Vise Mounting Hole (4). From below the Vice Mount Plate (3), slide on another Flat Washer (7) and screw a Lock Nut (8) onto the bolt. Repeat for the three remaining Mounting Bolts. (6) 2. If the Receiver Tube (1) or Vise Mount Plate becomes damaged, it should be repaired by a qualified technician. please read tHe FolloWIng careFullY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLy DIAgRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANy REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT HE OR SHE IS qUALIFIED TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR ExPRESSLy STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN By CERTIFIED AND LICENSED TECHNICIANS, AND NOT By THE BUyER. THE BUyER ASSUMES ALL RISK AND LIABILITy ARISINg OUT OF HIS OR HER REPAIRS TO THE ORIgINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISINg OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. 5. With 17mm wrenches or other appropriate tools, tighten the Mounting Bolts (6) and Lock Nuts (8) securely. Unless the Vise is needed elsewhere for other tasks, it can be left mounted on the Hitch Mount Vise Plate, but remove the Vise Plate/Vise from the vehicle before driving. After use, brush off and wipe down the Vise Plate. To remove the Hitch Mount Vise Plate from the vehicle's receiver. Pull out the Hairpin Clip (2) that locks the Receiver Retaining Pin (5) in position. Slide the Receiver Retaining Pin back out. 6. 7. 8. parts lIst & assemblY dIagram parts 1 2 3 4 5 6 7 8 parts lIst description Receiver Tube Hairpin Clip Vise Mount Plate Vise Mounting Holes Receiver Retainting Pin Mounting Bolts - M10 x 1. 50 x 40mm Flat Washer - M10 Lock Nut - M10 x 1. 50 Qty 1 1 1 4 1 4 8 4 9. [. . . ] THIS WARRANTy IS ExPRESSLy IN LIEU OF ALL OTHER WARRANTIES, ExPRESS OR IMPLIED, INCLUDINg THE WARRANTIES OF MERCHANTABILITy AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. [. . . ]