User manual CHICAGO 66632

[. . . ] saVe this manual. Copyright© 2009 by Harbor Freight Tools®. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. [. . . ] When in use, this tool is near rotating parts. Do not wear loose clothing when working with rotating parts. Contain hair, jewelry and any item that may become entangled in rotating part. Do not allow children to play with or near this item. Position batteries in proper polarity and do not install batteries of different types, charge levels, or capacities together. Inspect before every use; do not use if parts are loose or damaged. Always wear ANSI approved safety goggles when working. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. read the important saFetY inFormation above before set up or use of this product. 2. 8. SKU 66632 For technical questions, please call 1-800-444-3353. Page 2 operation Photo Source adjust the distance between the Tachometer and the reflective tape. After the test button is released, the maximum, minimum and last readings of the measurements are stored. Socket for AC Adapter Memory Button Display Test Button symbol key Low Battery Indicator: -Batteries are low and need replacing Maximum reading is displayed Minimum reading is displayed Photoelectricity mode symbol Revolutions per minute (RPM) Figure 2 1. Cut a 3/4" length of reflective tape (included), peel off the backing and attach the reflective tape to the object to be measured. 7. note: The longer the piece of reflective tape, the easier it is to make the measurement. Point the Tachometer's Photo Source at the reflective tape on the object, holding the tool approximately 2" to 8" away. Reflective Tape Figure 4 To access the readings, press and release the Memory Button repeatedly to cycle through the readings on the Display. The indicators above the digits will appear as described in Figure 4. 3. Turning Figure 3 4. Press and hold the Test Button, keeping the beam of light perpendicular to the reflective tape surface. [. . . ] Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. [. . . ]