User manual CHICAGO 90154

[. . . ] FOLDABLE - WITH 12" WHEELS MODEL 90154 ASSEMBLY AND OPERATING INSTRUCTIONS TRAILER Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed exclusively by Harbor Freight Tools®. 3491 Mission Oaks Blvd. , Camarillo, CA 93011 Visit our website at: http://www. harborfreight. com For technical questions or replacement parts, please call 1-800-444-3353. Manual Revised 04j; 06k; 08d; 09b Copyright© 2003 by Harbor Freight Tools®. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Read this material before using this product. [. . . ] For technical questions, please call 1-800-444-3353. PAGE 14 34. 35. SKU 90154 9. 29 48 13. 96 9. 29 13. 96 4. 37 18. 9 48 18. 9 4. 37 9. 29 48 14. 35 0. 75 13. 96 8. 9 4. 37 18. 9 48 18. 9 4. 37 3/8" CROSS HEAD BOLT 3/8" FLAT WASHER 3/8" SPRING WASHER 3/8" HEX NUT FIGURE K 36. To attach a bed (not included) to the frame of the Trailer, it is recommended to use the following parts: a. 2: 3/4" x 48" x 48" Plywood (not included). 24-30: 3/8" Cross Head Bolts (not included). 24-30: 3/8" Flat Washers (not included). 24-30: 3/8" Spring Washers (not included). Qty: 24-30: 3/8" Hex Nuts (not included). (See Figure K. ) As shown in the diagram, drill all mounting holes with a 3/8" high speed drill bit. (See Figure K. ) Use the 3/8" Cross Head Bolts, 3/8" Flat Washers, 3/8" Spring Washers, and 3/8" Hex Nuts to secure the Plywood bed to the Trailer frame. (See Figure K. ) For technical questions, please call 1-800-444-3353. 38. SKU 90154 STAKE 3. 5 3/8" DIAMETER 2 FRONT END BACK END RAIL 3. 5 2 6. 5 2 6. 5 27 2 6 1. 6 1. 25 2 SIDE RAIL 3. 5 8 2 24 2 8 2 0. 7 5 3/8" DIAMETER R2 2 18. 5825 2 3/8" DIAMETER 50. 835 94. 5 2 18. 5825 FIGURE L 39. 1. 2 5 1. 25 2 2 To attach rails (not included) to the Trailer, it is recommended to use the following parts: a. 8: 1. 6" x 3. 5" x 27" wood strips (not included). 6: 0. 75" x 3. 5" x 48" wood strips (not included). 6: 0. 75" x 3. 5" x 94. 5" wood strips (not included). 4: 0. 175" x 2" x 2" x 3. 5" Steel Angle (not included). 16: 3/8" x 1-3/4" Hex Bolt (not included). 8: 3/8" x 2-3/8" Hex Bolt (not included). 48: 3/8" x 2-3/8" Hex Bolt (not included). 72: 3/8" Spring Washer (not included). 112: 3/8" Flat Washer (not included). (See Figure L, and Figure M, next page. ) Cut the Stakes, Front End Rails, Back End Rails, and Side rails to the sizes indicated in the illustration and drill 3/8" diameter mounting holes where shown. [. . . ] Department, 400 7th Street SW NSA-11, Washington, DC 20590. You can also obtain other information about motor vehicle safety from the Hotline. Note: Check with your local department of Motor Vehicles for registration procedures. Some DMV's require the Certificate of Origin to be notarized, others do not. BEARING PACKING INSTRUCTIONS Read and adhere to the following instructions; failure to read and obey all of the following instructions COMPLETELY will void the warranty and can result in damage to the trailer, property damage, or SERIOUS PERSONAL INJURY. [. . . ]