User manual CHICAGO 91214

[. . . ] AUTO-DARKENING WELDING HELMET with ANSI-Approved Lens 91212, 91214, 94336, 94337 SET Up AND OpERATING INSTRUcTIONS NOTE: YOUR Helmet may appear different from the Helmet pictured in this manual. Aside from the slight differences noted in this manual, the warnings, operation instructions, and maintenance procedures will remain the same. Distributed exclusively by Harbor Freight Tools®. 3491 Mission Oaks Blvd. , Camarillo, CA 93011 Visit our website at: http://www. harborfreight. com Read this material before using this product. [. . . ] Maintain the helmet and lens correctly to help ensure reliable protection. · Clean filter's surfaces regularly. Keep sensors and solar cells clean using a clean lint-free tissue/cloth. Do not use any solvents on filter's screen or helmet components. Protect filter from liquid and dirt contact. · Should the Auto-Darkening Welding Helmet not darken upon striking an arc, stop welding immediately Page 3 For technical questions, please call 1-800-444-3353. and have the helmet checked by an authorized service technician. · Regularly replace the Front Lens cover if it becomes cracked, scratched, pitted, or otherwise damaged. · Do not make any modifications to either the Auto-Darkening Filter or the rest of the helmet, other than those specified in this manual. Do not use any replacement parts other than those specified in this manual. Unauthorized modifications and replacement parts will void the warranty and expose the user to the risk of personal injury. Do not open or tamper with the Auto-Darkening Filter. Do not place the Welding Helmet's Auto-Darkening Filter on a hot surface. SEVERE pERSONAL INjURY and/ or bLINDNESS may occur if the user fails to follow the aforementioned warnings and/or fails to follow the operation instructions. WARNING INHALATION HAzARD: Welding and plasma cutting produce TOxIc FUMES. Exposure to welding or cutting exhaust fumes can increase the risk of developing certain cancers, such as cancer of the larynx and lung cancer. Also, some diseases that may be linked to exposure to welding or plasma cutting exhaust fumes are: · Early onset of Parkinson's Disease · Heart disease · Ulcers · Damage to the reproductive organs · Inflammation of the small intestine or stomach · Kidney damage · Respiratory diseases such as emphysema, bronchitis, or pneumonia Use natural or forced air ventilation and wear a respirator approved by NIOSH to protect against the fumes produced to reduce the risk of developing the above illnesses. SpEcIFIcATIONS Model Shell Designs Power Source Viewing Area Operating Temp. Clear State Weight Shade Range Ultraviolet / Infrared Protection Welding Protection Types Shell Material Lens Power ON / OFF Storing Temperature 91212 Blue (rechargeable battery included, no additional battery required) Flames Solar Cells 91214 94336 Eagle 94337 Skull (lifetime ~6, 000 hours) 3V CR2450 battery 3. 74" x 2. 44" 14 to 158° F 3. 5 DIN 1. 6 lb. 3. 86" x 1. 73" 23 to 158° F 4 DIN 1. 3 lb. 9 to 13 DIN up to shade 16 all the time For All Arc Welding Processes; Not for Laser Welding or Oxyacetylene Welding/Cutting High Impact-Resistant Plastic Polyamide Nylon Switching Speed (Clear to Dark): 1/25, 000 second ANSI z87. 1-2003 - approved Lens Fully Automatic -4 to 158° F Page 4 For technical questions, please call 1-800-444-3353. Auto-darkening Welding Helmet REV 06l; 09e; 09h SHADE GUIDE cHART Arc current (Amperes) Welding process Stick/Arc Mild Steel MIG (argon shielded) (CO2 shielded) 10 5 15 20 30 9 40 60 10 80 100 125 150 11 175 225 250 275 12 12 13 12 13 300 350 450 500 14 14 13 13 14 13 14 14 13 14 14 13 10 10 9 10 11 11 8 9 10 11 12 11 10 11 12 11 12 10 13 11 12 Mild Steel MIG, Aluminum MIG TIG Flux Core Plasma Cutting Plasma Welding 12 UNpAcKING When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible. Check for light tightness before each use. Inspect all operating parts before each use for signs of wear or damage. Any scratched, cracked, or pitted parts should be replaced immediately before using again to avoid severe personal injury. Turn the shade knob to the correct shade for the application as shown in the chart above. If a selection of shades are recommended for your application, try the darkest setting first. [. . . ] Place the new Lens into the right position by bending it slightly, enough to fit in between the tabs at each side of the lens and putting the lens in place. Check and make sure that the Lens is securely installed. Clean the Filter Lens with a clean lintfree tissue or cotton cloth. Do not immerse the lens in water or any other liquid. [. . . ]