User manual CHICAGO 92924

[. . . ] For technical questions, please call 1-800-444-3353 PAGE 2 SKU 92924 PERSONAL SAFETY 1. Watch what you are doing, and use common sense when operating the Brake Fluid Bleeder. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool may result in serious personal injury. [. . . ] Then, set the emergency parking brake and block the tires with chocks. Be alert for hot brake components and other hot vehicle components to avoid accidental burns. Work in a well-ventilated area and do not smoke near engine fuel and battery components. Use the Brake Fluid Bleeder only with brake fluid. Do not attempt to use the tool to siphon any other liquids. Contamination of brake fluid and possible brake system failure may result. Follow guidelines for proper brake fluid disposal. Used brake fluid should be properly disposed of or recycled. Contact your local solid/liquid waste authority for information on recycling. For technical questions, please call 1-800-444-3353 PAGE 4 2. 3. 4. 5. 6. 7. 8. 9. SKU 92924 10. Some brake pads contain asbestos. Asbestosis, a chronic lung inflammation, can result from prolonged inhalation of asbestos particles. Accordingly, wear appropriate ANSI approved respiratory devices and proper protective clothing when working near any brake pads. · Do not use pressurized air to blow off brake dust. Only use brake parts cleaner to clean dust off of the brake calipers. 11. WARNING!The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. SAVE THESE INSTRUCTIONS CAUTION! Always keep brake fluid from contacting the vehicle's paint finish. Brake fluid will damage the paint finish on vehicles. ASSEMBLY AND OPERATING INSTRUCTIONS NOTE: For additional information regarding the parts mentioned in the following pages, refer to the Assembly Diagram on page 10. For best service and proper safety, you should incorporate a regulator and inline filter when using an air compressor (not included) to operate the Brake Fluid Bleeder. (See Figure A. ) QUICK CONNECTOR QUICK COUPLER QUICK CONNECTOR REGULATOR FILTER AIR COMPRESSOR TO BRAKE FLUID BLEEDER AIR HOSE QUICK COUPLER FIGURE A PAGE 5 SKU 92924 For technical questions, please call 1-800-444-3353 2. Make sure the vehicle engine is off. Then, chock the vehicle wheels to prevent the vehicle from moving. Fill the New Fluid Supply Bottle (1) with up to 24 ounces of clean, new, brake fluid. [. . . ] 18. 19. SKU 92924 For technical questions, please call 1-800-444-3353 PAGE 8 INSPECTION, MAINTENANCE, AND CLEANING 1. Before each use: Inspect the general condition of the Brake Fluid Bleeder. Check for misalignment or binding of moving parts, cracked or broken parts, damaged Hoses, loose connections, and any other condition that may affect its safe operation. If a problem occurs, have the problem corrected before further use. [. . . ]