User manual CHICAGO 94770

[. . . ] Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. For technical questions or replacement parts, please call 1-800-444-3353. Read this material before using this product. Failure to do so can result in serious injury. [. . . ] If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this document as soon as possible. 8. 9. SAVE ThIS MANUAL You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference. 10. SAFETY WARNINGS AND PRECAUTIONS WARNING!: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before using this tool!11. SKU 94768/69/70/71 67650 For technical questions, please call 1-800-444-3353. Page 2 12. Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician. PRODUCT SPECIFIC SAFETY PRECAUTIONS 1. Do not exceed the Gross Vehicle Weight Rating of the truck. Before each use, always examine the trailer (not supplied) for: proper tire air pressure, damaged tail lights, damaged side running lights, loose bolts and nuts, structural cracks, bends, and any other condition that may affect safe operation. Do not use a trailer when minor damage appears. Never allow adults, children, or pets to ride in the trailer. Before each use, always attach the safety chains (not supplied) of the trailer to the towing vehicle. Make sure the safety chain is attached to the towing vehicle with the same length for each side. Do not allow the safety chain to drag on the ground. Verify that the payload being transported is properly and safely secured in the trailer. Load the trailer evenly from side to side with 60% of the load forward of the Axle. The towing vehicle must be capable of towing the trailer and its payload. Verify that the towing vehicle hitch (not included) is capable of towing the weight of the trailer and its payload. The towing capacity of the hitch is typically stamped on the Hitch drawbar. Make sure the Ball Coupler and the vehicle's ball hitch (not included) are of equal mating size (see Specifications on page 2), and are rated equal to, or greater than, the weight of the trailer and its payload. Do not exceed 45 miles per hour when towing a trailer. Excess speed is a major cause of vehicle-trailer accidents. [. . . ] IN FACT, THE MANUFACTURER AND/ OR DISTRIBUTOR EXPRESSLY STATES THat ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 94768/69/70/71 67650 For technical questions, please call 1-800-444-3353. Page 4 LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. [. . . ]