User manual CHICAGO 95187

[. . . ] Maximum working pressure 500 PSI Long Reach: 10-1/2" Long x M12 x 1. 25 / 500 PSI Working Pressure Standard Reach: 10-1/2" Long x M14 x 1. 25 / 500 PSI Working Pressure Standard Reach: 10-1/2" Long x M10 x 1. 00 / 500 PSI Working Pressure 2. 8 Pounds Net Weight SAVE THIS INSTRUCTION SHEET You will need this instruction sheet for the safety warnings and precautions, assembly, operating, parts list and assembly diagram. Keep your invoice with this instruction sheet. Write the invoice number on the front cover. [. . . ] Always wear ANSI-approved safety impact goggles during use. The brass components of this product contain lead, a chemical known to the State of California to cause cancer and birth defects (or other reproductive harm). (California Health & Safety Code § 25249. 5, et seq. ) COMPONENTS 1 234 1. Compression Gauge (1): Displays cylinder pressure at cranking speed for an individual cylinder. When the Gauge is not pressurized, the Gauge Needle may be anywhere in the zero box without affecting the accuracy of the Gauge. M14 x 1. 25 Standard Reach Adapter (2): Connects the Compression Gauge (1) to a cylinder that has 14mm standard length spark plug threads. M12 x 1. 25 Long Reach Adapter (3): Connects the Compression Gauge (1) to a cylinder that has 12mm extra length spark plug threads. M10 x 1. 00 Standard Reach Adapter (4): Connects the Compression Gauge (1) to a cylinder that has 10mm standard length spark plug threads. OPERATION 1. Attach the proper size Adapter (2, 3, 4) to the Compression Gauge (1) Hose. Remove the spark plug from one cylinder of the engine, and screw the Adapter into the spark plug hole. Disable coil to prevent engine from starting. Crank the engine several times until the highest reading appears on the Compression Gauge (1). Make note of the reading, then press the Air Release Button on the Compression Gauge to release all compressed air in the tool. Remove the Adapter from the spark plug hole and re-install the spark plug. NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Due to continuing improvements, actual product may differ slightly from the product described herein. PLEASE READ THE FOLLOWING THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. [. . . ] proof of purchase date and an explanation of the complaint must accompany the merchandise. if our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. [. . . ]