User manual CHICAGO 98487

[. . . ] Warning indicates a hazardous situation which, if not avoided, could result in death or serious injury. caution, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. notice is used to address practices not related to personal injury. caution, without the safety alert symbol, is used to address practices not related to personal injury. SKU 98487 For technical questions, please call 1-800-444-3353. Page 2 Warning! [. . . ] Maintain labels and nameplates on the product. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. MiScellaneouS 1. Hitch connections need to be capable of supporting the weight of the Hitch and attached implement, plus load. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Keep clear of moving parts. 4. SaVe theSe inStructionS. SKU 98487 For technical questions, please call 1-800-444-3353. Page 4 SpeciFicationS Description Distance Between Arms Cat ll, 3 point quick hitch (fits tractors 45 - 75 HP) 32-3/4" unpacking When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. Set up inStructionS read the entire iMportant SaFetY inForMation section at the beginning of this manual including all text under subheadings therein before set up or use of this product. note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. tractor center link top hook Quick hitch implement tractor lift arms clevis pin (3) lower hook lower Movement pins note: It is recommended that two people assist when connecting this product. Connect the Quick Hitch to the tractor's lift arms using a Clevis Pin With Flat Bracket On End (3), and secure with R Pins (4). See illustration above and assembly diagram page 8. Connect the tractor's Center Link to the top bracket of the Quick Hitch, secure with a 1" Clevis Pin (8). For technical questions, please call 1-800-444-3353. Page 5 2. SKU 98487 3. Connect the implement to the Quick Hitch by lowering the Lower Movement Pins into the inside of the hitch hooks. Lock them in place by moving both Latch Handles down. Check that all connections are tight before using. If the tractor has stabilizer arms, they will not fit into the Quick Hitch mounting area along with the lift arms. Use stabilizer chains, or some other longer Mounting Pin (neither included) to fasten the Quick Hitch to the tractor. 5. Latch Handle Top Hook Lower Hook R Pin (4) Lower Hook Mounting non-aSae implements 1. If the implement does not meet ASAE specifications, use an Adapter Bracket (not included) to mount it to the Quick Hitch as illustrated on the next page. Remove the Top Hook (5) by taking out the two Hex Bolts (2), Lock Washers (7), and Nuts (6). Slide the Adapter Bracket (not included) over the Top Bracket of the Quick Hitch, and attach with the Clevis Pin (8). [. . . ] THIS WARRANTy IS ExPRESSLy IN LIEU OF ALL OTHER WARRANTIES, ExPRESS OR IMPLIED, INCLUDINg THE WARRANTIES OF MERCHANTABILITy AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. [. . . ]