User manual CHICAGO AUTO A-C RECOVERY RECHARGE MACHINE

[. . . ] Auto A/C ReCoveRy / ReChARge MAChine Model 95951 Set up And opeRAting inStRuCtionS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. distributed exclusively by harbor Freight tools®. 3491 Mission Oaks Blvd. , Camarillo, CA 93011 visit our website at: http://www. harborfreight. com Read this material before using this product. Failure to do so can result in serious injury. [. . . ] Refilling: When lighted, indicates that the machine is refilling the auto system. drain: When lighted, indicates that the machine is draining used cooling oil from the auto A/C system. hp / Bottle Full: During the Recovery process when the light is on, it indicates either that the HP pressure has reached or exceeded 240 PSI. The Recovery process will halt until the pressure has automatically lowered to 180 PSI or less. If the pressure is within safe bounds and this light comes on, it indicates that the Refrigerant Tank is full, weighing over 14 kg. The Refrigerant Tank must be partially emptied to continue the recovery process. REV 09h SKU 95951 For technical questions, please call 1-800-444-3353. Page 10 6. Bottle empty: During the Refilling Process, if the Refrigerant Tank contains less than 1 kg of fluid, the process will stop and the indicator light will come on. The bottle must be refilled before continuing the Refilling Process. lCd display 1. When the "kg" indicator light is on, the value shown in the LCD Display is the recovered or refilled refrigerant weight. When the "MIN" indicator light is on the LCD Display shows the Vacuuming Time in Minutes. valve Controls 1. hp valve: High Pressure Control Valve. Function keys 1. "+" key: Press this Key to adjust the setup value. Each press of the Key increases the set value by 1. "Circulate": Press this Key to lock in the value set using the + Key. "Recovering": Press this Key to initiate the refrigerant recovery operation. During the Recovery operation, pressing this Key will toggle the LCD display between "Setup Value" and "Actual Recovery Value. " "vacuumize": Press this Key to initiate the vacuum generation operation. "Refilling": Press this Key to initiate the Refilling operation. "Start / Stop" : Press this Key to start or stop the current operation. 4. 6. WARning: Do not use any refrigerant other than factory specified R134A (also identified as 134A, Forane 134a or HFC-134a) in an automotive A/C system. use of Freon or other Fluorocarbons is prohibited by uS law. WARning: do not inhAle or hAndle ReFRigeRAnt. inhalation of high concentrations of refrigerant is harmful and may cause heart irregularities, dizziness, central nervous effects, unconsciousness or death. intentional misuse or deliberate inhalation may cause death without warning. [. . . ] BeFoRe eACh uSe, inspect the general condition of the tool. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, leaking valves, damaged hoses, and any other condition that may affect its safe operation. If abnormal noise, leaking or vibration occurs, have the problem corrected before further use. MAintenAnCe ChARt Before Maintenance type use Inspect tool for damage (see #2, above) Wipe off with clean, moist cloth Check Refrigerant and Cooling Oil level Check Compressor Oil Level 2. After use x x x x REV 09h SKU 95951 For technical questions, please call 1-800-444-3353. Page 16 pARtS liSt For ease of understanding, the components of this machine are displayed in groups. [. . . ]