User manual CHICAGO DELUXE 12 VOLT DC LIGHT KIT

[. . . ] This product is not intended for marine use. If necessary, have a qualified service technician install the Light Kit. Do not attempt to install this product yourself if you do not feel technically competent to do so. There are certain applications for which this product was designed. [. . . ] 9. 10. ASSEMBLY INSTRUCTIONS Vehicle Connection: 1. Note: Connect the Light Kit after the trailer is fully assembled. Connect the BROWN wire of the Color Coded Trunk Harness (5) to the towing vehicle's Tail Light wire. Connect the YELLOW wire of the Color Coded Trunk Harness to the vehicle's Left Hand Stop & Turn light. Connect the GREEN wire of the Color Coded Trunk Harness to the vehicle's Right Hand Stop & Turn light. Make sure to use the BLUE Wire Splitter Connectors to make these connections. Diagram. ) Attach the WHITE GROUND wire to the towing vehicle's frame. Diagram. ) NOTE: If the towing vehicle has rear turn signals separated from its stop lights, you will need to install additional hardware. SPLITTER WIRE CONNECTOR R. H. STOP & TURN (YELLOW) SIDE MARKER (AMBER) RIGHT REAR BROWN SPLITTER WIRE CONNECTOR GREEN 3 REAR MARKERS (RED) REQUIRED FOR TRAILERS OVER 80" WIDE (NOT INCLUDED) GROUND (WHITE) TAIL LICENSE, SIDE MARKER (BROWN) GROUND (WHITE) SPLITTER WIRE CONNECTOR SIDE MARKER (AMBER) YELLOW BROWN LEFT REAR & LICENSE BRACKET SKU 93861 For technical questions, please call 1-800-444-3353 PAGE 2 REV 07k Trailer Light Mounting And Connection: 1. Mount the Stop-Tail-Turn Light (1), marked "L. H. " (with the License Window), on the left rear of the trailer with its side marker to the outside of the trailer. Then, mount the License Plate Bracket (3) with the Stop-Tail-Turn Light. Diagram. ) Mount the Stop-Tail-Turn Light (1), marked "R. H. " (without the License Window), on the right rear of the trailer with its side marker to the outside of the trailer. Diagram. ) Use the Metal Frame Clips included in the Mounting Hardware Package (6) to mount each half of the Split Y-Style Harness (4) down each side of the trailer. Run the YELLOW and BROWN wires down the left side and GREEN and BROWN wires down the right side of the trailer. Diagram. ) Connect the YELLOW and BROWN wires to the left hand Stop-Tail-turn Light (1) with the Wire Nut Connectors included in the Mounting Hardware Package (6). Diagram. ) Connect the GREEN and BROWN wires to the right hand Stop-Tail-turn Light (1) with the Wire Nut Connectors included in the Mounting Hardware Package (6). Diagram. ) Attach the WHITE GROUND wire to the trailer tongue or frame. Diagram. ) Mount the two Marker Clearance Lights (2) in the areas shown in the illustration. Connect each wire from the Marker Clearance Lights to the BROWN wire on each half of the Split Y-Style Harness (4). Diagram. ) Connect the Split Y-Style Harness (4) Plug to the Color Coded Trunk Harness (5) Plug. [. . . ] Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. [. . . ]