User manual CHICAGO DELUXE 12V TRAILER LIGHT KIT

[. . . ] DELUXE 12V TRAILER LIGHT KIT 41782 ASSEMBLY AND OPERATING INSTRUCTIONS Distributed exclusively by Harbor Freight Tools®. 3491 Mission Oaks Blvd. , Camarillo, CA 93011 Visit our website at: http://www. harborfreight. com Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. Copyright© 20061997 by Harbor Freight Tools®. [. . . ] Maintain labels and nameplates on the Trailer Lights. If unreadable or missing, contact Harbor Freight Tools for a replacement. Always wear safety impact eye goggles and heavy work gloves when working on or around lead-acid batteries. Wear long sleeve shirt, long pants and work shoes. Using personal safety devices reduce the risk for injury. Safety impact eye goggles and heavy work gloves are available from Harbor Freight Tools. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use a power tool in areas near flammable chemicals, dusts, and vapors. Do not use this product in a damp or wet location. Always unplug the Trailer Lights from their electrical connection before performing any inspection, maintenance, or cleaning procedures. If splashed, immediately wash affected area with clean water. Continue washing area until medical help arrives. Turn vehicle ignition off before making cable connections. Vehicle's engine must be cooled down before making cable connections. Connect Trailer Lights cable to proper polarities. Connect black cable to the negative battery terminal, and the red cable to the positive battery terminal (For a negative grounded system). Failure to do so could result in sparks, possible fire and severe personal injury. Keep cables clear of fan blades, belts, pulleys, and other moving parts of the engine that may cause injury, or damage to the Trailer Lights. Work on vehicle in well ventilated areas to prevent the accumulation of noxious or explosive gases. 3. 4. Do not allow the Black and Red battery cables or terminals to touch. Failure to adhere to these directions could result in severe personal injury. [. . . ] Attach the WHITE ground wire to the trailer frame. Attach the side markers to the forward part of the sides of the trailer. One on each side as indicated in the diagram on page 8. Attach the marker light wires to the BROWN harness wire using blue wire connectors. 5. [. . . ]