User manual CHICCO ACTIV3 TOP

[. . . ] 02/15 Activ3 TM WARNING Failure to follow all warnings and instructions may result in serious injury or death. For your child's safety, read the labels and owner's manual before using the product. € Please save owner's manual for future use. Always keep child in view while in the stroller. [. . . ] Be sure the BUTTON ON THE FRAME nests into the hole on the Canopy Clip. Make sure both sides of the Canopy are clipped to the frame as shown. 20 21 To Attach Canopy Sujeción de la capota Canopy Capota 13A Locate the hook and loop strips along back edge of the Canopy, 1 section on the top and 2 sections along the side. Thread the Canopy top section between both Cross Bars, wrap around the bottom Cross Bar and attach to the corresponding hook and loop section on the Seat Back. If the canopy is being used without the seat, fold the canopy fabric around the frame and attach to the hook and loop sections. Pull the front edge of the Canopy forward to open the Canopy. Attach the 2 side strips of hook and loop to the frame down tube as shown. Unzip the back section on the Canopy and release the extension to extend the Canopy. Wrap the Wrist Strap around the Push Handle and thread the Parent Loop through the Handle Loop end and tighten. To store the Wrist Strap, wrap the Parent Loop around the Push Handle and secure the hook and loop tabs, as shown. To engage the Front Wheel Swivel Lock on the Stroller. Locate the lever on the LEFT side of the Push Handle. Rotate the lever forward to lock the Swivel Wheel. The Front Swivel Wheel will not lock into place until the wheel is in the straight, forward position. To release the Front Wheel Swivel Lock, press in the lever's Center Button. Before running, jogging, or walking fast, LOCK the front wheel from swiveling. Locate the lever on the RIGHT side of the Push Handle. Rotate the lever forward to lock the Brakes. To release the Brakes press in the lever's Center Button. WARNING ADVERTENCIA 26 27 How to Adjust the Backrest Cómo ajustar el respaldo How to Adjust the Backrest Cómo ajustar el respaldo 19 The Backrest can be adjusted to 4 positions. Squeeze the two levers located behind the Backrest. Lower the Backrest down until the desired position has been reached and then release the levers. [. . . ] With the Bumper Bar attached and Stroller Seat FULLY RECLINED, place the KeyFit® infant carrier into the Stroller Frame. The carrier will only fit into the frame "REAR FACING". The baby will be facing you when pushing the Stroller. Make sure infant carrier clicks into the Stroller Frame on both sides. [. . . ]