User manual CHICCO EASY RELAX

[. . . ] €  ARNING: Do not use the reclined cradle once your W child can sit unaided. Age permitted use: from birth to 9 kg (6 months). €  o not use the bouncing chair for more than one child D at a time. [. . . ] €  lease refer to the care label for instructions on how to P clean the product. €  lways dry metal parts to avoid the formation of rust. A •  fter cleaning, check that the fabric and seams are not A worn or damaged. €  rolonged exposure to sunlight may cause the materiP als to fade. COMPONENTS A – Rear legs B – Rear handle C – Carry handles D – Side joint to unlock the backrest E – Front joint to adjust the leg rest F – Crotch strap G – Legs H – Central button of safety harness buckle I – Safety harness prongs HOW TO ASSEMBLE THE PRODUCT Before use, the baby-bouncing chair requires a very simple assembly operation.  urn the legs (G) in an outward direction and fit the T rear part (A) into legs’ holes, pressing the locking buttons (diag.  his operation may be carried out by fitting part A, in one T way only, in order to prevent any assembly errors (diag.  ou will hear a click, signalling that part A has been Y fitted into position; ensure that the part has been fitted correctly by trying to pull it away from the frame (diag.  lso, ensure that the carry handles (C) of the bouncing A chair are facing outwards with respect to the legs; diagram 4 shows the correct position.  you wish to make the bouncing chair more compact, for example for car transport, it is sufficient to unlock part A, pressing the buttons highlighted in diagram 5.  nfasten the safety harness by pressing the central button on the buckle (H) and, at the same time, remove the other part of the buckle, by pressing its prongs (I) (diag. The bouncing chair is now ready for baby to use.  lways fasten the safety harness, inserting it through A the crotch strap (F), and check that the harness fastens baby correctly and that it is adjusted/tensioned correctly (diag.  o adjust the backrest, turn the side joints (D) (diag. 8) and recline the backrest to the desired position; lock the joints by turning them in the opposite direction (diag. This operation may be carried out with 12 the child sitting in the bouncing chair, although it can be more difficult. [. . . ] HOW TO REMOVE THE COVER The cover of the baby-bouncing chair can be removed and cleaned.  emove the safety harness from the “D” rings; then R remove the cover starting from the front, first from the footrest, unfastening the Velcro straps located underneath, and then from the backrest (diag.  o replace the cover onto the bouncing chair, repeat T the above operations in the reverse order, sliding the lower fabric strap through the adjusting joints of the backrest (D), as shown in diagram 15. [. . . ]