User manual CHICCO TRIO FOR ME AUTO-FIX

[. . . ] Do not leave the carrycot near similar sources of heat. ⷠWARNING: If you purchase a mattress separately, ensure that it can be fitted correctly to the carrycot. Do not use mattresses higher than 10 mm. ⷠWARNING: Do not leave in the carrycot objects that may reduce its depth. [. . . ] ⷠWARNING: This carrycot can only be used with the CHICCO strollers fitted with the CLIK CLAK system. Ensure that the carrycot is fitted correctly onto the stroller before placing the child into it. ⷠWARNING: Keep all plastic bags out of children's reach to avoid the risk of suffocation. ⷠWARNING: Products left in the sun may become very hot. Let the carrycot cool down before sitting your child in it. WARNING: Never use the carrycot with a trestle. ⷠWARNING: Do not let your baby sleep in the carrycot for long periods of time: this product is not intended to replace a cot. Routinely wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the carrycot has come into contact with water. Maintenance Lubricate the moving parts only if necessary, with a light application of a silicone based lubricant. Always dry the metal parts to prevent the formation of rust. 7): A) Carrying position B) Intermediate position C) Rest position 8 ­ To position the handle vertically, hold it in a central position and pull it in an upward direction, until a clack is heard, indicating that it is correctly locked into position (diagram 8a). To replace the handle in the rest position, press the two buttons located on the base of the handle at the same time, and then turn it in a downward direction (diagram 8b). WARNING: The carrycot cannot be carried with the handle placed in the intermediate or rest positions, but only with the handle in the carrying position. It is recommended to refer to the cleaning instructions, shown on the care label, which is sewn on the product. 9 - Remove the canopy from the carrycot following the instructions indicated in point 3. Then remove only the metal arch, pulling it from one of the two ends (diagram 9); do not remove the rear arch with the 4 pins to carry out cleaning operations. 10 - Remove the mattress padding through the opening located on the rear of the fabric cover (diagram 10). 11 - To remove the internal lining of the carrycot; slide off the plastic band placed on the child's headrest (diagram 11). HOW TO USE THE CARRYCOT AS A PRAM This carrycot can be fitted onto the Chicco strollers featuring the "Clik Clak" system and used as a pram. HOW TO FIT THE CARRYCOT TO THE STROLLER To fit the carrycot to the stroller, position the stroller, fitted with the Clik Clak system, as shown in the instructions of the stroller. NB: If the stroller has a removable backrest or seat, it is recommended to remove the backrest or seat as indicated in the instructions of the stroller. [. . . ] NB: If the stroller has a removable backrest or seat, it is recommended to remove the backrest or seat as indicated in the instructions of the stroller. 1 - Hold the handle in the carrying position and place the carrycot onto the armrests, with the footrest end of the carrycot facing the handle of the stroller (diagram 1). 13 - Ensure that the two joints, located on the two sides of the carrycot, coincide with the openings located on the armrests of the stroller (diagram 13 A); then position the carrycot. A clack will indicate that it is locked correctly into place (diagram 13 B). [. . . ]