User manual CHICCO TRIO SPRINT

[. . . ] 15 GB SPRINT then it should be placed in a suitable pram the product and all of its components have not been damaged during transportation. Vices are engaged before use ing this product. Seat unit or car seat attachment devices are - tions the moveable parts of the stroller do dren. [. . . ] Do not iron content inside the basket before folding the stroller. CANOPY metal parts to prevent the formation of rust if the stroller has come into MAINTENANCE of the stroller. Check the proper locking of them on both sides. Operation of the stroller, ensure that all the movable plastic parts placed along GENERAL INSTRUCTIONS WHEELS ASSEMBLY REMOVABLE BUMPER BAR fixing on the stroller’s structure (fig. HOW TO USE THE SAFETY HARNESS HOW TO OPEN THE STROLLER are at a safe distance. Ensure that during these operations the movable parts 3. Pull the trigger opening mechanisms, located on the handles of the stroller, at the time (diag. After sitting the child in the stroller, insert the 2 prongs into the buckle and, BACKREST ASSEMBLY COMPONENTS A) Backrest tube B) Connection of backrest tube C) Front release button E) Rear release button 6. To assemble the backrest, insert both backrest tubes (A) in the corresponding underside of the seat). Release the button to lock the backrest in the nearest position. to ADJUSTING THE LEG REST DOUBLE-TWIST ADJUSTABLE ERGONOMIC HANDGRIP BACKREST FITTING 8. Fit the cover on the stroller’s backrest from the top (fig. Thread the crotch strap leg divider through the slot located on the backrest cover (fig. 17 the desired position, adapting it to the height and most comfortable position REAR BRAKES overheating. [. . . ] Act on the rear release button and remove it from the pin (fig. Act on the front release button and remove the backrest tube from its coupling (fig. hOW TO USE THE CHILD CAR SEAT AND CARRYCOT instructions supplied. [. . . ]