User manual CIAT MICRO-CONNECT

[. . . ] Due to the progression of standards and equipment, the characteristics indicated by the text and images in this document in no way constitute a commitment and must be confirmed by our services. CIAT thanks you for making this purchase. This high technology device using the latest R 410A refrigerant will provide you with many years of comfort at the lowest consumption costs. [. . . ] Floor heating does not need to be very hot to be efficient. At most it should be quite warm during cold weather. Given the effect of radiation, thermal comfort is generally obtained with lower air temperatures than with traditional heating methods (convection). Another advantage of floor heating is that it has very stable regulation, thereby avoiding sudden changes of temperature. However, this great stability implies that reaction time is in the region of several hours. This means that with floor heating, warming up is always gradual and that temperature variations must be as low as possible. Taking into account the above, CIAT has opted for regulation based on response as a function of external temperature. The temperature of the floor therefore depends on the temperature outdoors. the specialists speak of regulation by water balance. The regulation of this water balance must be left to your fitter who will adjust it as a function of your dwelling and wishes. 2 - Set point display (the desired temperature) 3 - Profile of daily program 4 - Compressor on indicator 5 - Electric make-up operating status (option) 6 - Boiler operation status indicator (option) 7 - Swimming pool heating on indicator (option) 8 - Programming mode indicator (reserved for the fitter) 9 - Test mode indicator (reserved for the fitter) 10 - Modification keys 11 - Display ambient temperature by pressing - and OK simultaneously 12 - Change mode (comfort, economic or programmed), confirm choice or cancel faults 13 - Function selector index 14 - Function selector Set the control knob to Setting the day and time is done withr Pressing on the OK key triggers the passage to the following day. NB: The unit is at standstill when in time setting mode. Caution, note that only reversible devices can operate in heating, frost free and swimming pool modes. You must configure the terminal as a function of the specific characteristics of your installation. This operation must be done once and for all by a qualified technician when starting up. The settings can be modified within the ranges defined in the table below: Program that permits the device to operate hour by hour as a function of the comfort or economy setting. [. . . ] 2) - Permanent fault: the fault number is displayed in steady light on the screen. After having solved the problem on the installation, set the knob at stop position and press the OK key for 3 seconds. With the thought of material improvement always in mind, CIAT reserves the right, without notice, to proceed with any technical modification. [. . . ]