User manual CINO FUZZYSCAN PROGRAMMING MANUAL REV A2

[. . . ] FIXED MOUNT SCANNER Programming Manual International Edition, Rev. A Released Date May 26, 2010 First Release Page 16 Rev. 18, 2010 Page 38 Add "UPC/EAN Security Level" Add "Immediate" parameter (option 5) to "Time Delay to Low Power Mode" and change the default value from 5 seconds to immediate. Add "Supplement Scan Voting" in Symbology Reading Control Add "EAN Supplement Control" Keyboard Layout ­ Add "Czech (QWERTY)", remove "Universal", and rename Spain (QWERTY) to Spain (Spanish QWERTY), Latin America (QWERTY) to Spain (Latin America, QWERTY) Page 36 Cancel" Power On Indicator" and add "Good Read Indicator". [. . . ] Length SS MS Default (98) 98-Minimum Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically. 25 FIN (2 digits) Symbology Reading Control MSI/Plessey Setting PROGRAM Family Code Selection MSI/Plessey Setting P. C SS SS SS SS SS SS SS SS MS F_DEFAULT Parameter Selection Disable MSI/Plessy Enable MSI/Plessy Select MOD 10 check digit Select MOD 10-10 check digit Select MOD 11-10 check digit Disable check digit transmission Enable check digit transmission Default (04) 01-Maximum Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically. Option Code 0 1 2 3 4 5 6 FIN (2 digits) MSI/Plessey Min. Length FuzzyScan Fixed Mount Scan Programming Manual MSI/Plessey Max. Length SS MS Default (98) 98-Minimum Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically. FIN (2 digits) 26 Symbology Reading Control Code 128 & UCC/EAN 128 Setting PROGRAM Family Code Selection Code 128/EAN-128 Setting P. C SS SS SS SS SS SS SS MS F_DEFAULT Parameter Selection Disable Code 128 and UCC/EAN-128 Enable Code 128 and UCC/EAN-128 Disable function code conversion Enable function code conversion ISBT Concatenation Off ISBT Concatenation On Default (01) 01-Maximum Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically. Option Code 0 1 2 3 4 5 FIN (2 digits) Code 128/EAN-128 Min. Length SS MS Default (98) 98-Minimum Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically. FuzzyScan Fixed Mount Scan Programming Manual FIN (2 digits) 27 Symbology Reading Control UK/Plessey Setting PROGRAM Family Code Selection UK/Plessey Setting P. C SS SS SS SS SS SS SS SS SS MS F_DEFAULT Parameter Selection Disable UK/Plessey Enable UK/Plessey Select UK/Plessey Standard Format Select UK/Plessey CLSI Format Disable Convert X to A-F Enable Convert X to A-F Disable check digit transmission Enable check digit transmission Default (04) 01-Maximum Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically. Option Code 0 1 2 3 4 5 6 7 FIN (2 digits) UK/Plessey Min. Length FuzzyScan Fixed Mount Scan Programming Manual UK/Plessey Max. Length SS MS Default (98) 98-Minimum Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically. FIN (2 digits) 28 Symbology Reading Control Telepen Setting PROGRAM Family Code Selection Telepen Setting P. C SS SS SS SS SS SS SS MS F_DEFAULT Parameter Selection Disable Telepen Enable Telepen Select Telepen Numeric mode Select Telepen Full ASCII mode Disable check digit transmission Enable check digit transmission Default (04) 01-Maximum Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically. Option Code 0 1 2 3 4 5 FIN (2 digits) Telepen Min. Length FuzzyScan Fixed Mount Scan Programming Manual SS MS Default (98) 98-Minimum Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically. FIN (2 digits) 29 Symbology Reading Control GS1 DataBar Setting PROGRAM Family Code Selection GS1 DataBar Setting P. C SS SS SS SS SS SS SS MS F_DEFAULT Parameter Selection Disable GS1 DataBar (RSS-14) Enable GS1 DataBar (RSS-14) Disable GS1 DataBar Limited Enable GS1 DataBar Limited Disable GS1 DataBar Expanded Enable GS1 DataBar Expanded Default (04) 01-Maximum Only available for Expanded GS1 Databar. Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically. Option Code 0 1 2 3 4 5 FIN (2 digits) GS1 DataBar Min. Length FuzzyScan Fixed Mount Scan Programming Manual GS1 DataBar Max. Length SS MS Default (74) 74-Minimum Only available for Expanded GS1 Databar. Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically. FIN (2 digits) 30 Symbology Reading Control Linear-stacked & Korea Post Code Setting PROGRAM Family Code Selection Composite Codes Setting P. C SS SS SS SS SS SS SS SS SS SS F_DEFAULT Parameter Selection Disable composite codes Enable composite codes UPC Composite Mode: UPC never linked UPC Composite Mode: UPC always linked Disable PDF417 Enable PDF417 Disable MicroPDF417 Enable MicroPDF417 Disable Enable Option Code 0 1 2 3 0 1 2 3 0 1 PDF417/MicroPDF417 Setting Codablock F Setting FuzzyScan Fixed Mount Scan Programming Manual Korea Post Code Setting SS SS Disable Enable Length fixed in 6 characters. 0 1 Composite Codes Setting If UPC Composite Mode: UPC never linked is selected, UPC barcodes are transmitted regardless of whether a MicroPDF417 symbol is detected. If UPC Composite Mode: UPC always linked is selected, UPC barcodes are only transmitted when the MicroPDF417 is detected. 31 Keyboard Interface Control Keyboard Layout (Language) Setting PROGRAM Family Code Selection Keyboard Layout P. C SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS F_DEFAULT Parameter Selection USA (QWERTY) France (AZERTY) Germany (QWERTZ) United Kingdom - UK (QWERTY) Canadian French (QWERTY) Spain (Spanish, QWERTY) Sweden/Finland (QWERTY) Portugal (QWERTY) Norway (QWERTY) Spain (Latin America, QWERTY) Italy (QWERTY) Netherlands (QWERTY) Denmark (QWERTY) Belgium (AZERTY) Switzerland-Germany (QWERTY) Iceland (QWERTY) Japan (DOS/V) Czech (QWERTY) Option Code 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 FuzzyScan Fixed Mount Scan Programming Manual Please refer to the ASCII/HEX Table listed in the Appendix to determine HEX codes for characters, symbols, and functions to be used as preamble or postamble. To set preamble or postamble as function key output, you must enable the "Function Key Emulation" feature as listed in page 3-25 first. Keyboard Interface Message String : Preamble 1-15 characters Data Length 2-3 digits Prefix Symbol ID 1 or 2 characters Scanned Data Variable length Suffix Symbol ID 1 or 2 characters Postamble 1-15 characters Record Suffix 1 character 32 Keyboard Interface Control Record Suffix, Preamble, Postamble & Caps Lock PROGRAM Family Code Selection Record Suffix P. C SS SS SS SS SS SS SS MS F_DEFAULT Parameter Selection None RETURN TAB SPACE ENTER (Numeric Key Pad) User defined character (1 character) None 1-15 characters Maximum 15-character input; scan "FIN" to terminate this selection. Option Code 0 1 2 3 4 5, (00-7F) FIN [00-7F], [FIN] Preamble Postamble SS MS None 1-15 characters Maximum 15-character input; scan "FIN" to terminate this selection. FIN [00-7F], [FIN] FuzzyScan Fixed Mount Scan Programming Manual Caps Lock Control SS SS SS "Caps Lock Off" State "Caps Lock On" State Auto Detect (PC/AT, PS/2, Keyboard Replacement and DOS/V Machines only) 0 1 2 Caps Lock Release Control SS SS "Caps Lock On, Caps Off" "Caps Lock On, Shift Off" 0 1 The function of "Caps Lock Control" and "Key Pad Emulation" are only available for IBM PC/AT, PS/VP, PS/2 series personal computers and compatible machines. While selecting the other host interfaces, these selections don't perform the above functions for you. Please check the actual Caps Lock state in use while software application is running. If the Caps Lock state is off, select "Caps Lock Off" state, then FuzzyScan will perform normal data transmission. If the Caps Lock state is on, select "Caps Lock On" state. Select "Auto Detect", FuzzyScan will perform special transmission handshaking without changing the status of Caps Lock switch. 33 Keyboard Interface Control Delay Setting PROGRAM Family Code Selection Intermessage Delay P. C SS MS None 1-99 (x5) msec. Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically. F_DEFAULT Parameter Selection Option Code FIN (2 digits) Intercharacter Delay SS MS None 1-99 (x5) msec. Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically. FIN (2 digits) Interfunction Delay SS MS None 1-99 (x5) msec. [. . . ] Scan "2nd Insertion" and set the identified position to "12", then inserted character to "09". In the final, you must scan "FIN" (Finish) code to terminate this selection. Scan "3rd Insertion" and set the identified position to "16", then inserted character to "09". In the final, you must scan "FIN" (Finish) code to terminate this selection. [Important Notice] Please note that Condensed DataWizard will follow the preset working flow as below: Verifier Formatter Replacer Organizer So when you set the identified position in Data Organizer, you must consider the inserted data which you already set via Data Formatter. 53 Symbology ID Table Each AIM Code Identifier contains the three-character string ]cm where: ] = Flag Character c = Code Character m = Modifier Character Cino ID Code Family Primary Format Code Character UPC-A UPC-A with 2 supple. [. . . ]