User manual CISCO 7912

[. . . ] Phone Guide Cisco IP Phone 7905G and 7912G for Cisco CallManager INCLUDING LICENSE AND WARRANTY Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www. cisco. com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Adjusting the Volume If you want to. . . Adjust the volume level for a call Then. . . Press the volume button during a call or after invoking a dial tone. [. . . ] Standard (or "ad hoc") conference calling is a default feature available on most phones. · Join--use this softkey to establish a standard conference (3-16 participants) among several current calls on a single line. Standard (or "ad hoc") conference calling is a default feature available on most phones. 16 78-16319-01 Basic Call Handling · cBarge--use this softkey to begin a standard conference call (3-16 participants) on a shared line. This is an optional feature available only for shared lines, and your system administrator must configure it for you. · MeetMe--use this softkey to host a conference (up to 100 particpants, depending on your configuration) requiring participants to call an established number at a specific time. This is an optional feature that your system administrator must configure for you. See "Starting or Joining a Meet-Me Conference Call" section on page 18 for more details. Starting or Joining a Standard Conference Call A standard (or "ad hoc") conference allows from 3 to 16 people to participate in a single call. See the table below for details. If you want to. . . Invite current callers to join a standard conference Then. . . Choose any call on the line and press Select. Repeat this process for each call you want to add to the conference. From one of the selected calls, press more > Join. The selected calls are automatically added to the conference. During a connected call, press more > Confrn to add another party to the call. Enter the conference participant's phone number. After the call connects and you have spoken to the conference participant, press Confrn again to add this party to your call. Follow this procedure to add each participant. You do not need to do anything special to join a standard conference call. On the remote phone that is a shared line, choose the call you want to join and press cBarge. Choose an active conference and press ConfList. Participants are listed in the order in which they join the conference, from bottom to top. While viewing the conference list, press Update. While viewing the conference list, locate the person listed at the bottom of the list with an asterisk (*) next to his/her name. Scroll to highlight the participant's name and press Remove. [. . . ] Follow these steps to access and download the Cisco Information Packet and your warranty document from the CD or from Cisco. com. Launch your browser, and go to this URL: http://www. cisco. com/univercd/cc/td/doc/es_inpck/cetrans. htm The Warranties and License Agreements page appears. To read the Cisco Information Packet, follow these steps: a. Click the Information Packet Number field, and make sure that the part number 78-5235-03A0 is highlighted. [. . . ]