User manual CISSELL AOLMAN198

[. . . ] The warranty period on each new replacement part furnished by Cissell in fulfillment of the warranty on new equipment or parts shall be for the unexpired portion of the original warranty period on the part replaced. With respect to electric motors, coin meters and other accessories furnished with the new equipment, but not manufactured by Cissell, the warranty is limited to that provided by the respective manufacturer. Cissell's total liability arising out of the manufacture and sale of new equipment and parts, whether under the warranty or caused by Cissell's negligence or otherwise, shall be limited to Cissell repairing or replacing, at its option, any defective equipment or part returned f. o. b. Cissell's factory, transportation prepaid, within the applicable warranty period and found by Cissell to have been defective, and in no event shall Cissell be liable for damages of any kind, whether for any injury to persons or property or for any special or consequential damages. [. . . ] Square Extension with bracket used with No. 4X, 4C or 4 Sleever for extra working space. SINGLE TABLE One 15-1/2" SINGLE TABLE. 4C Sleever with 12" extension. SINGLE TABLE One 15-1/2" SINGLE TABLE. Drawing shows suggested heads on 38" Triple Table. SPECIFICATIONS PUFF IRON SPECIFICATIONS Steam Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (4. 14 - 6. 9 Bars) Steam Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2" Pipe Connection Steam Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4" Pipe Connection Vacuum Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1/4" Connection Vacuum Requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4" Press Capacity Boiler Horsepower Single Puff Iron Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Double Puff Iron Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Triple Puff Iron Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8 H. P. APPROXIMATE APPROXIMATE SHIPPING WEIGHTS UNIT (with fabric pressing heads) 33" Double Table with 2 and 4-C with extension and bracket. P252 P523 P257 P284 P253 P271 M263 P256 P276 P277 Description Hose Adapter Vacuum Manifold, Triple Table* Vacuum Manifold, Double Table* Vacuum Manifold, Single Table* Manifold Cap, 1-1/2" Adapter Cap, 3/4" #8 - 3/8" S. M. S. Pipe Clamp "O" Ring Union w/"O" Ring * Includes Hose Adapter(s) Page 9 For Egg Heads Only, Use P527 Flow Control Valve Page 10 ALVES RELATED PARTS SINGLE TABLE - VALVES AND RELATED PARTS Puff Iron "D" Models without Vacuum Ref. TU4599 P262 P266 P466 P470 P504 P506 390401246 TU4607 P273 M280 390401013 OP267 P459 P460 P461 P519 390401031 OP267 P115 TU4598 P465 TU2814 C249 TU4934 TU2846 SF49 P228 P132 P98 P126 P36 TU4600 P525 OP297 OP268 P524 P526 P529 Description Steam Pipe, 3/4" x 18" Jacket Flange 90° Fitting, 3/8"P x 1/4"T Disc Valve Assembly Renewable Disc Packing Nipple, 3/8" x 3-1/2" Nipple, 3/4" x 2-1/2" Carriage Bolt, 5/16" - 18 x 3/4" Carriage Bolt, 1/4" - 20 x 1" Nipple, 1/2" x 7" Bushing, 3/4" x 1/2" Cross, 3/4" Bushing, 3/4" x 1/4" Fitting, St. 1/4"P x 1/4"T Straight Upsteam Tube Assembly Nipple, 3/4" x Close Bushing, 3/4" x 1/2" Tee, 3/4" x 3/4" x 3/8" Nipple, 3/4" x 6" Valve Rod Lockwasher, 5/16" Hex Nut, 5/16 - 18 Hex Nut, 1/4 - 20 Lockwasher, 1/4" Yoke Assembly Foot Pedal Support Bar Collar Set Screw, 1/4" - 20 Pedal Wrench Union, 3/4" "L" Shaped Tube Straight Connector, 1/8"P x 1/4"T Reducing El, 1/4"P x 1/8"P 90° Connector, 1/4"P x 1/4"T Insulation Insulation 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 Page 11 For Egg Heads Only, Use P527 Flow Control Valve Page 12 ALVES RELATED PARTS DOUBLE TABLE - VALVES AND RELATED PARTS Puff Iron "D" Models without Vacuum Ref. P266 OP296 TU4599 P262 P466 P470 P504 P506 390401246 TU4607 OP267 P459 P460 P461 390401031 P115 TU4610 TU4600 P273 M280 P266 TU2846 TU4934 TU2814 C249 P519 P465 SF49 P228 P177 P98 P126 P36 P525 OP297 OP268 P524 P526 P529 TU4598 P532 Description Flange Nipple, 1/2" x 5" Steam Pipe, 3/4" x 18" Jacket 90° Fitting, 3/8"P x 1/4"T Disc Valve Assembly Renewable Disc Packing Nipple, 3/8" x 3-1/2" Nipple, 3/4" x 2-1/2" Bushing, 3/4" x 1/2" Cross, 3/4" Bushing, 3/4" x 1/4" Fitting, 1/4"P x 1/4"T Nipple, 3/4" x Close Tee, 3/4" x 3/4" x 3/8" Nipple, 3/4" x 5" Union, 3/4" Carriage Bolt, 5/16" - 18 x 3/4" Carriage Bolt, 1/4" - 20 x 1" Flange Lockwasher, 1/4" Hex Nut, 1/4" - 20 Lockwasher, 5/16" Hex Nut, 1/4" - 20 Straight Upsteam Tube Assembly Valve Rod Yoke Assembly Foot Pedal Support Bar Collar Set Screw, 1/4" - 20 Pedal Wrench "L" Shaped Tube Straight Connector, 1/8"P x 1/4"T Reducing El, 1/4"P x 1/8"P 90° Connector, 1/4"P x 1/4"T Insulation Insulation Nipple, 3/4" x 6" Steam Valve Rod - Used on Vacuum Models Only for Right Side Head 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 Page 13 For Egg Heads Only, Use P527 Flow Control Valve Page 14 ALVES RELATED PARTS TRIPLE TABLE - VALVES AND RELATED PARTS Puff Iron "D" Models without Vacuum Ref. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Part No. PIF163 PIF162 PIF161 X54 X56 S9 PIF169 PIF204 PIF172 PIF164 PIF167 V12 V345 PIF202 PIF154 Description Swinging Arm Support Upright Support Base Handle End Cork Handle Handle Belt Support Holder Stop Delrin Bushing Spacer Pivot Stud Gland Spring Latch Extension Spring Ref. 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Part No. Description C396 TU2846 P219 S20 AT368 TU4820 RC355 IB143 TU2847 P302 J10 VSB154 P163 P164 TU4934 Crown Nut, 1/4 - 20 Lockwasher, 1/4" Tr. Scw. , 1/4" - 20 x 1/2" #8 - 32 Crown Nut Lockwasher, #8 Cut Washer, #10 Hex Cap Scw. , 1/4" - 28 x 1 - 1/2" Hex Nut, 1/4" - 28 Cut Washer, 1/4" Tr. 1/4" - 20 x 1" Eye Bolt Wing Nut, #10 - 24 Large Adapter, 4C or 4X Small Adapter, 4 Sleever Hex Nut, 1/4" - 20 Page 18 Ref. [. . . ] Depress foot pedal to release steam pressure and allow to cool. Remove nylon covers from unpolished heads. TO RESTART LEAKING DISC VALVE SEAT (Steam comes out of head) A. Be careful not to damage the end of stem. [. . . ]