User manual CISSELL CHMW35-WE55-165

[. . . ] Contents 1 General safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 Technical data and dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] After that only the right display will continue to show the program number. This is the end of the program. Remark: If any attempt is made to interrupt the program prematurely during a spin phase of the program, all functions on the display will be temperary replaced by blinking horizontal dashes. After that only the right display will continue to show the program number and the door will be released. This is the end of the program. 18 4 Remarks: Freely programmable stop-function Before starting a program it is possible to preprogram a time stop in every program segment. This function permits special additional functions like adding bleach or extra detergent to the wash bath. Programming: After selecting the program, press the ECO-button (E) and keep it depressed. Now push the START-button (S) simultaneously and release same. The left display now shows "StO" (Stop) and the right display shows the program number. The first program sequence LED is switched on. Confirm by pressing the START-button (S) if a time stop is required in this phase of the program. If no time stop is needed, press the ECO-button (E) to move on to the next segment of the program. Run through the entire program in this way. If needed, return to previous segments by pressing the SELECT-button (P). Errors can be corrected by returning to the erroneously programmed time stop in the segment and correcting by pressing the START-button (S). After the final program segment all programmed time stops will be displayed and the left display will show "End". Confirm this program by pressing the STARTbutton (S) again. Operation: When a stop is reached during the run of the program, the time will be stopped. The wash bath will be filled to the appropriate level and temperature and the programmed wash action is executed. The left display will alternately show temperature and "StO", while the central display is showing "F1". Now, if so desired, additional detergents can be added. When this has been done, press the START-button (S) to continue the run of the program. To remove any possible remains of corrosive products in the tub, the machine will rinse an additional 2 seconds. [. . . ] When all desired programs are provided with the right price, end the operation by pressing the push button or pulling over the coin meter switch-lever. 27 5 Standard programs The machine is standard equipped with 10 programs (0+9). These have been designed in cooperation with specialized detergent manufacturers to obtain the best possible wash results using the most frequently used detergents. Program 0 (starching) is mostly used in very special applications and is therefore not displayed on the front panel. 0. CURTAINS 1 RINSE 2 BATHS 1 BATH 2 BATHS 1 BATH 2 BATHS 1 BATH 2 BATHS 1 BATH 1 BATH COLD 40°/90°C 90°C 40°/60° 60°C 40°/40°C 40°C 30°/30°C 30° COLD 28 6 Technical remarks Internal connections of the electrical heating Heating 4, 2kW 3x1, 4kW 6kW 9kW 12kW 12kW 3x2kW 3x3kW 3x4kW 3x2kW 3x2kW 3x2kW 3x3kW 3x3kW 3x3kW 3x3kW 3x4kW 3x4kW 3x4kW -------------------------- 3x220V R5 LC1D0901 LC1D0901 LC1D1810 -----LC1D253 3x380V R5 LC1D0901 LC1D0901 LC1D0901 LC1D0901 LC1D0901 15kW LC1D253 LC1D1810 18kW LC1D323 LC1D1810 21kW --------------------- LC1D1810 LC1D1810 LC1D1810 LC1D1810 24kW B = Black Gy = Grey R = Red PU = Purple Br = Brown Bu = Blue W = White W/B = White/black Remark: Other executions are available as options. Internal connections of the motors 220V Low speed High speed Low speed 380V High speed 29 6 Thermo-magnetic motor protection Autom. [. . . ]