User manual CISSELL VSBMAN61

[. . . ] Va c u u m Spotting Board Model A OWNERS MANUAL CISSELL MANUFACTURING COMPANY HEADQUARTERS 831 SOUTH FIRST ST. BOX 32270 LOUISVILLE, KY 40232-2270 PHONE: (502) 587-1292 SALES FAX: (502) 585-3625 SERVICE/PARTS FAX: (502) 681-1275 THIS MANUAL MUST BE GIVEN TO THE EQUIPMENT OWNER. MAN61 (ECN5680) 10/99 WB 2C Page1 WARRANTY The Cissell Manufacturing Company (Cissell) warrants all new equipment (and the original parts thereof) to be free from defects in material or workmanship for a period of one (1) year from the date of sale thereof to an original purchaser for use, except as hereinafter provided. With respect to non-durable parts normally requiring replacement in less than one (1) year due to normal wear and tear, including, but not limited to, cloth goods, valve discs, hoses, and iron cords, and with respect to all new repair or replacement parts for Cissell equipment for which the one (1) year warranty period has expired, or for all new repair or replacement parts for equipment other than Cissell equipment, the warranty period is limited to ninety (90) days from date of sale. [. . . ] No pipe line or sewage connection is needed. Adjustable board for operator comfort from 37" to 44" in height. Loosen knob near top of the column, slide top assembly up or down to desired height, then tighten knob. MECHANICAL MAINTENANCE CLEANING LARGE PAN ASSEMBLY Lift chemical tray and large vitrelite glass from board. Tap off nose band and perforated metal, clean with steam gun. Clean pan of all dirt, lint and chemicals. Open drain holes with a hairpin or pointed instrument. It is important that these drain holes are open in order that the vacuum can extract any liquids that form in the pan. CLEANING SWINGING ARM ASSEMBLY Lift out small green vitrelite glass by finger hole at back of pan. Clean pan or all dirt, lint and chemicals (use steam gun). Open drain holes (in pan) with a hairpin or pointed instrument. VACUUM SEAL The rubber air-foam gasket around pipe of top assembly at top of column is a seal to help create a stronger vacuum. Should this gasket become loose, re-cement into position. CHECK VALVE Inspect and clean check valve located above drain receptacle. Liquids separated from the vacuum exhaust within the column are automatically drained from board by check valve. Lift drain receptacle up and out for emptying. Tag See Pages 15-16 Knob Tray Bucket w/ Thumb Screws Tray Rod Tray Cover Drain Receptacle Check Valve Assembly Column See Page 17 16" Pedal Rod See Page 18 Rubber Gasket 3/16 x 3 Eye Bolt #10-24 Wing Nut #8-3/8" Sheet Metal Screw 5/16 Hex. Cap Screw 5/16 Lock Washer 5/16 Cut Washer 5/16 - 8 x 3" Bolts 5/8 - 11 Hex. Cap Screw 5/16 - 18 Thumb Screw 3/8 - 16 Hex. Cap Screw 5/16 - 18 Hex Nut Page11 VACUUM SPOTTING BOARD MODEL A LARGE PAN PARTS Ref. VSB182 VSB22 VSB204 VSB176 VSB173 VSB15 VSB52 VSB95 VSB171 VSB155 PT355 Description Spotting Nose w/Band & Spring Large Perforated Nose Large White Glass w/Pads Front Pad Only Rear Pad Only Drip Cup Casting Large Pan Complete 5/16 - 18 Rd. Screw 5/16 Lead Washer 1/4 - 20 Flat Hd. Nut VSB65 - Large Pan Assembly includes Part Nos. [. . . ] Replace old disc if it is cracked or pitted preventing a perfect seat. If spring and disc are satisfactory, seat in valve body may be damaged or valve stem bent. Defective parts must be replaced to secure proper operation. When major repairs are required, install a Cissell Replacement Valve. [. . . ]