Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CITIZEN WATCH 0580. We hope that this CITIZEN WATCH 0580 user guide will be useful to you.
Lastmanuals help download the user guide CITIZEN WATCH 0580.
Detailed instructions for use are in the User's Guide.
[. . . ] Used to display cities, reset timer and chronograph , etc.
B
A
Display city names, start and stop racing and chronograph
Digital display Second hand
C
M
24-hour hand
Mode hand
Used to switching mode and changing to setting state
Changing Modes
The mode changes each time the M button is pressed. The current mode during operation can be confirmed with the mode hand. The modes change in the following sequence: [TME] [CAL] [R-1] [R-2] [CHR] [AL-1] [AL-2] [SET]
Adjusting the Time
1. [. . . ] Press button M and set the watch to TME mode. Press button A or C , and display the name of the city for which the time is to be set. Pull out button M the digital display will start to flash. * The time can be switched to Daylight Saving Time as this time. Press button C to switch to Daylight Saving Time ("SUMMER" will be displayed) for that city. Each time button A is pressed, the display will change in the order of SUMMER, seconds, minutes, hours and 12H/24H display. Press button C to set the flashing digit of the display (continuously pressing button C will cause the number displayed to advance rapidly). · When setting to a 12 hour display, make sure the display for AM/PM is correct. (Turning Off the Alarm) Pressing any of button A , B or C will turn off the alarm sound.
Setting and use of racing timer (R-1/R-2)
1. Race Timer 1 (R-1) : It has no auto-repeat function which repeats timing from the set time to time up three times automatically. Race Timer 2 (R-2) : It has an auto-chrono function which after time up, chronograph timing starts automatically, and you can measure the passed time since time up. <Setting Procedure> (Same for R-1 and R-2) · It can be set from 60 min to 10 min in 5 min intervals, and set to 6, 5, 3, 1 min. Press button M and set the watch to either R-1 or R-2 mode. At this time, press button C until the time you want to set is flashing on the display. Push in button M to the normal position to complete the setting procedure. When button A is pressed, the timer will start to measure time from the set time. [. . . ] Push in button M to the normal position to complete the setting procedure. When button A is pressed, the timer will start to measure time from the set time. The timer is stopped by pressing button A during timing. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CITIZEN WATCH 0580
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CITIZEN WATCH 0580 will begin.
