User manual CITIZEN WATCH 6870

[. . . ] 2 4 7 C M B A 5 3 6 1 English CONTENTS 1. Names of Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mode (Display Function) Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before Using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Correction can be made rapidly by holding button B or C down. Correct the alarm set time by moving the hands in the closest direction to the desired alarm time. * When setting the alarm time, be careful that AM and PM are set correctly by referring to the 24H hand. <Canceling Alarm Set Time> The alarm set time is canceled by pressing button A when the alarm is ON. <Alarm Monitor> The alarm sound can be monitored by pressing button A in the alarm 1 mode when the alarm is OFF. Use of Daily Alarm [AL-2] The daily alarm also uses a 24-hour clock. Once the alarm is set, the alarm sounds for 15 seconds at the alarm set time, once a day. The alarm sound can be stopped by pressing any of buttons A , B or C . <Daily Alarm ON Display> Alarm set time (hours, minutes) B A Press button M to switch to the alarm 2 (AL-2) mode. The second hand will indicate either ON (23 second position) or OFF (19 second position). In both cases, the hour, minute and 24H hands will indicate the alarm set time. C Alarm ON M Correction position 14 <Setting the Alarm Time> (1)Pull button M out. The second hand will indicate the ON position. (2)Press button B or C to move the hour, minute and 24H hands to the time at which the alarm is desired to be set. · Correction can be made one minute at a time, in the clockwise direction, each time button B is pressed. · Correction can be made one minute at a time, in the counterclockwise direction, each time button C is pressed. Correction can be made rapidly by holding button B or C down. Correct the alarm set time by moving the hands in the closest direction to the desired alarm time. (3)Push button M in to the normal position. * When setting the alarm time, be careful that AM and PM are set correctly by referring to the 24H hand. <Switching Between Alarm ON and OFF> The alarm will switch between ON and OFF each time button A is pressed with button M pulled out. <Alarm Monitor> The alarm sound can be monitored by pressing button A in the alarm 2 mode when button M is in the normal position. Use of Chronograph [CHR] The chronograph is able to measure time up to a maximum of 59 minutes, 59 and 19/20th seconds in 1/20th second increments after which the chronograph returns to the chronograph reset display and stops. [. . . ] Avoid extreme temperatures Avoid leaving your watch in extremely warm or cold locations for a long period of time. Avoid chemicals and corrosive gases Avoid wearing this watch in the presence of chemicals and corrosive gases. If mercury or any chemical (such as fuel gasoline, thinner, alcohol, spray liquids of cosmetics or the like, ) makes contact with the watch, discoloration, deterioration or damage to the case, band or other components may occur. Avoid static electricity The integrated circuits used in the watch are sensitive to static electricity. [. . . ]