User manual CITIZEN WATCH C45

[. . . ] Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Name of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setting the Analog Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Switching Modes (Functions) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Normal Alarm Display (B) B Press button (A) in Alarm Mode to switch the alarm between ON and OF (off). ("ON" display: Alarm set, "OF": Alarm released) Alarm ON Display AM ALM Alarm OF (off) Display (A) ALM AM 15 20 SELECT SPLIT RESET W. R. 10bar (B) LIGHT START STOP SET Hours Munites ON/OF (Off) (B) (3) Press button (A) to set the time you want to sound the alarm. (Press and hold button (A) for rapid advancement. ) 12 13 40 35 (A) Hours (B) 30 25 <Sounding Length of Alarm and How to Stop the Alarm Sound> Alarm buzzer will sound for about 20 seconds. Press any button to stop alarm sound. <Sound Monitor> Minutes Alarm will sound while button (A) is kept pressing in Alarm Mode. [Chronograph Reset Display] * If Time Mode is set to 12-hour display system, alarm time also becomes 12hour display system. Pay attention to AM/PM and set correctly. * Alarm time does not change when summertime is set in Time Mode. * Auto-return to Normal Alarm Display will activate when the watch is left in adjustment mode for approximately 2 minutes. * The watch automatically returns to the normal time mode when the alarm state continues for 2 minutes when in the alarm mode. * If button (M) is pressed in adjustment mode, display will immediately return to Normal Alarm Display. Inside paretheses are shown at the time of measurement after 60 minutes <Display of Time Measurement> 60 (M) 50 55 05 10 MODE 45 Chronograph shows "Minutes, Seconds and 1/100 second" up to 59 minutes 59 seconds 99 and will change to "Hours, Minutes and Seconds" after 60 minutes. [Up to 59 minutes 59 seconds 99] (A) 15 CHR (B) 20 SELECT SPLIT RESET W. R. Chronograph Mode <CHR> This chronograph measures up to 23 hours 59 minutes 59 seconds in units of 1/100 second. On reaching 24 hours of elapsed time, it resets to "00 minutes 00 seconds 00" and stops. It can also measure split times (intermediate elapsed time). Minutes (hour) 40 35 30 25 Minute CHR 1/100 second Second Seconds (minute) 1/100 second (second) Hour CHR [After 60 minutes] Second Minute 14 15 <Accumulative Time Measurement> (1) Start/Stop can be repeated for any number of times by pressing button (A). · EL Light will turn "ON" for 4 seconds when counting is stopped by pressing button (A). (2) Press button (B) when counting is stopped to reset Chronograph. <Split Time Measurement> (1) Start/Stop can be repeated for any number of times by pressing button (A). · EL Light will turn "ON" for 4 seconds when counting is stopped by pressing button (A). (2) Press button (B) while Chronograph is counting. · "SPLIT" will flash while Split Time is being displayed. · EL Light will turn "ON" for 4 seconds when button (B) is pressed. (3) Press button (B) when counting is stopped to reset Chronograph. (B) <Switching the Mode During Chronograph Measuring> Even if button (M) is pressed and the mode is switched while Chronograph is running, the measurement will continue. When you return to the Chronograph Mode, the measured time is again displayed. [. . . ] Timekeeping will become inaccurate if you place the watch close to magnetic health equipment such as a magnetic necklace or a magnetic latch of a refrigerator door or handbag clasp or the earphone of a mobile phone. If this has occurred, move the watch away from the magnet and reset the time. 29 · Use a soft cloth to wipe off dirt, perspiration and water from the case and crystal. · Use a soft, dry cloth to wipe off perspiration and dirt from the leather band. · To clean a metal, plastic, or rubber watchband, wash away dirt with mild soap and water. [. . . ]