User manual CITIZEN WATCH E76

[. . . ] Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before Using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting the Time and Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 * Setting the Time * Setting the Date * Correcting the Time Difference 4. [. . . ] Functions Unique to Solar-Powered Watches [Normal Time Display] [Insufficient Charging Warning Function] If continues to remain insufficiently charged If insufficiently charged If charged Two-second interval movement Stopped When the watch becomes insufficiently charged, the following warning functions are activated to inform the wearer that the watch is insufficiently charged. [Time Setting Warning Function] Note 2 When the watch is sufficiently charged after the time has been reset Note 1 Irregular two-second interval movement If charging is stopped as a result of the solar cell not being exposed to light When charging resumes as a result of the solar cell being exposed to light When the watch is exposed to light and the watch hands begin to move Note 1: Irregular two-second interval movement will continue if the time is not reset. Note 2: Check the date since it also may not be correct. [Power Save Function] 18 19 <Insufficient Charging Warning Function> Two-second interval movement 2 seconds 2 seconds <Overcharging Prevention Function> The overcharging prevention function is activated when the secondary battery is fully charged so that it is not charged further. Charging time for 1 day of operation: Time required for recharging the watch to run for 1 day at 1second interval movement. 23 6. Notes Regarding Handling of this Watch <Try to keep the watch charged at all times. > Please note that if you wear long sleeves, the watch can easily become insufficiently charged as a result of it being concealed and unable to be exposed to light. * When you take the watch off, try to place it in as bright a location as possible to ensure that it always keeps the correct time. 7. Replacing the Secondary Battery The secondary battery used in this watch does not have to be periodically replaced in the manner of ordinary batteries since it is able to be charged and discharged repeatedly. CAUTION Charging Precautions * Avoid recharging at high temperatures (over about 60°C/140ºF) since this may result in damage to the watch during recharging. Examples: * Charging the watch in close proximity to an incandescent lamp, halogen lamp or other light source that can easily reach high temperatures. * Charging the watch in a location that reaches high temperatures such as on a car dashboard. * When charging the watch with an incandescent lamp, always make sure the watch is at least 50 cm(20 in. ) away from the lamp so that it does not reach excessively high temperatures during charging. 24 25 8. All-Reset The display of this watch may not read correctly as a result of being subjected to the effects of static electricity or strong impact and so forth. When this happens, perform the procedure described in "9. Reference Position Alignment" after performing the all-reset procedure described below. Pull out the crown to the second click (time setting position). * The second hand moves to the 0-position stored in memory and stops. Continuously press button (A) for at least 2 seconds. * The hour hand and minute hands performs a demonstration movement consisting of moving forward then backward and then forward again. * The second hand makes one revolution in the forward direction. Always make sure to perform the reference position alignment procedure after performing all-reset. Note (1): Demonstration movement is not performed when the watch is insufficiently charged. Perform the all-reset procedure only after charging the watch sufficiently. (2): Do not perform the all-reset procedure while the date is changing. This can cause the date position to shift. If the date position should happened to become shifted out of position, pull out the crown to the first click after completing the all-reset procedure, and turn the crown to the left while pressing button (A) to set the date to the correct position. 26 27 9. [. . . ] · Leaving dust and dirt deposited between the case and crown may result in difficulty in pulling the crown out. Rotate the crown while in its normal position, from time to time, to loosen dust and dirt and then brush it off. · Dust and dirt tend to be deposited in gaps in the back of the case or band. Deposited dust and dirt may cause corrosion and soil your clothing. [. . . ]