User manual CITIZEN WATCH G900

[. . . ] Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Names of Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before Using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting the Reference Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Switching the Alarm ON and OFF · The alarm is switched ON and OFF each time button (B) is pressed in the H-AL mode, and the date & mode hand moves. 3. Stopping the Alarm · The alarm tone can be stopped from sounding by pressing any of buttons (A), (B) or (C) while the alarm tone is sounding. 4. Alarm Tone Monitor · You can check the alarm tone by pressing button (B) for about 2 seconds in the HAL mode. Local Time (L-TM) · This function lets you set the time in another region or country. · The time can be set in 30 minute units based on the time on the sub watch. 9. Use this function when the seconds of the watch are running too fast or too slow with respect to a telephone time signal and so forth. 2. Switching the Alarm ON and OFF · The alarm is switched ON and OFF each time button (B) is pressed in the L-AL mode, and the date & mode hand moves. 1. Procedure for Setting to the "Seconds" of a Standard Clock (1) Press button (C) until the date & mode hand moves to the "0-SET" seconds correction function. · The sub watch hour hand and sub watch minute hand indicate the current time. (2) Press button (B) in synchronization with Button (C) a standard clock or other time signal. * The movement of the hands differs according to the position of the second Sub watch hour hand hand on the watch. Button (B) 3. Stopping the Alarm · The alarm tone can be stopped from sounding by pressing any of buttons (A), (B) or (C) while the alarm tone is sounding. 4. Alarm Tone Monitor · You can check the alarm tone by pressing button (B) for about 2 seconds in the LAL mode. 22 Second hand Sub watch minute hand 23 A When second hand is between 0 and 29 seconds (watch is running fast relative to the B When the second hand is between 30 and 59 seconds (watch is running slow relative standard clock) : · Second hand: seconds relative to a standard clock> Waits at the same position for the Waits at the amount of time (seconds) the watch is 3 seconds position running fast. (For example, if the watch is running fast by 3 seconds, the second hand waits at the same position for 3 seconds. ) · Date & mode hand: Moves backward to the location of the Moves backward to the 3 position of the date date corresponding to the same number and then begins to count down. of seconds by which the watch is running fast, and then begins to count down from that position. (For example, if the watch is running fast by 3 seconds, the date & mode hand moves backward to the 3 position of the date. ) 24 <Example: Watch is running fast by 3 to the standard clock): · Second hand: Returns to the 0 seconds position and begins to move. · Date & mode hand: Waits at the 0-SET position. Countdown Operation · The date & mode hand informs you of the amount of time until the second hand begins to move in the case the second hand is between 0 and 29 seconds when button (B) has been pressed during correction. [NOTE] · The watch automatically returns to the time display if none of the buttons are pressed for about 2 minutes. 25 11. Functions Unique to Solar-Powered Watches · When the watch becomes insufficiently charged, the watch display changes as shown below. [Insufficient Charge Warning Display] [Normal Time Display] The second hand changes to 2-second interval movement. [. . . ] · Do NOT place the watch close to a magnet. Timekeeping will become inaccurate if you place the watch close to magnetic health equipment such as a magnetic necklace or a magnetic latch of a refrigerator door or handbag clasp or the earphone of a mobile phone. If this has occurred, move the watch away from the magnet and reset the time. · Do NOT place the watch close to household appliances that generate static electricity. [. . . ]