User manual CITIZEN C-330

[. . . ] 00 g A 10 10 20 B 50 50 40 60 d c 40 30 24 18 12 L-TM LTME C AL e 6 ALM AL a C f b M h 20 30 TM R L AP S PL English This watch is a combination watch which incorporates two kinds of chronograph functions and a timer function that facilitates clocking various time competitions in one watch besides the usual time indication, calendar and alarm functions. Moreover, this watch has other convenient functions: the time difference correction, local time indication and alarm in local time. 2 3 CONTENTS 1. SETTING HANDS TO "0" POSITION . . 62 4 5 1. NAMES OF PARTS MODE NAME A: BUTTON A B: BUTTON B C: BUTTON C Time difference correction (setting back) To Alarm mode To Setting status TIME Time difference correction (setting forward) Hand retractor Alarm ON/OFF switch CALENDAR ALARM SPL CHRONOGRAPH START/STOP To show split memo's Reset/Split LAP CHRONOGRAPH START/STOP To show memorized time Reset/Split To timer mode To "0" position correction status Reset/flyback TIMER START/STOP LOCAL TIME Time difference correction in local time (setting forward) Hand Retractor Time difference correction in local time (setting back) To local alarm mode To Setting status Alarm ON/OFF switch To time mode To Setting status LOCAL ALARM AM/PM monitor AM/PM monitor M: BUTTON M Pressing in To calender mode Pulling out To Setting status one step. To SPL To LAP chronograph mode chronograph mode To Setting status To "0" position correction status To local time mode To Setting status 6 7 MODE NAME a: DIGITAL DISPLAY I b: DIGITAL DISPLAY II c: 24HOUR HAND d: HOUR HAND e: MINUTE HAND f: SECOND HAND/ FUNCTION HAND I g: FUNCTION HAND II h: MODE HAND TIME Day indication CALENDAR Month indication ALARM Alarm time "Hour(s)" indication Alarm time indication "Minute(s)" indication SPL CHRONOGRAPH Split number indication 1/100 of a second or split time indication LAP CHRONOGRAPH Lap number indication 1/100 of a second or lap time indication TIMER Set "Minute(s)" or remaining "Minute(s)" indication Set "00" or remaining "Second(s)" indication LOCAL TIME Main time "Hour(s)" indication Main time "Minute(s)" indication LOCAL ALARM Alarm time "Hour(s)" indication Alarm time "Minute(s)" indication Date indication Date indication Main time "Hour(s)" indication by 24-hour system Main time "Hour(s)" indication Main time "Minute(s)" indication Main time "Second(s)" indication SPL chronograph "Second(s)" indication SPL chronograph "Minute(s)" indication ALM SPL LAP chronograph "Second(s)" indication LAP chronograph "Minute(s)" indication LAP Main time "Second(s)" indication Set "Minute(s)" indication TMR Local time "Hour(s)" indication by 24-hour system Local time "Hour(s)" indication Local time "Minute(s)" indication Local time "Second(s)" indication Always set at "0" position TME CAL Always set at "0" position L-TM L-AL 8 9 2. [. . . ] (2) If no button is pressed for 10 seconds after a lap time is shown, the chronograph returns to the status it showed just before the lap time (reset, time check, or stop status). 34 35 (3) If button A or C is pressed, the chronograph returns to the status it showed just before the lap time (reset, time check, or stop status). * All the records of lap times are cleared when button A is pressed to start a new time check, after the chronograph is reset. [Indication after memo is called back] · The second hand moves to the position that was previously memorized and stops there. · The function hand II moves to the chronograph minute position that was previously memorized and stops there. · Digital display I: Shows "L" and the memo number, both of which are blinking. · Digital display II: Indicates time in hundredths of a second. (After 60 minutes has elapsed, it indicates the chronograph hour(s). ) · The minute, hour and 24-hour hands indicate the current time. LAP chronograph time check C Reset C Automatic return after 10 seconds Lap time C Calling memo B A, C or automatic return after 10 seconds B It is possible to call memo in the reset or time check end status. Showing total time 36 B Showing lap time B A A Time check A Finish of time check (Indication of elapsed time) 37 [In case the mode is switched from the LAP chronograph mode to another] (1) In case the LAP chronograph mode is switched to another mode once and it is switched back to the LAP chronograph mode again, the last time check status, just before the first mode change, is recovered. However, 1 if the chronograph was in the lap time check status just before the first mode change, the chronograph is set for the time check status after the second mode change, 2 if the chronograph was in the lap time calling status just before the first mode change, the chronograph is set in the status (reset, time check or time check end status) just before the lap time calling status, after the second mode change. (2) In case the LAP chronograph mode is switched to the SPL chronograph mode, the time check status does not change. · In case the last chronograph status was the LAP chronograph reset status, the chronograph is switched into the SPL chronograph reset status. · In case the last chronograph status was the LAP chronograph time check status, the chronograph is switched into the SPL chronograph time check status. · In case the last chronograph status was the LAP chronograph time check end status, the chronograph is switched into the SPL chronograph time check end status. However, 1 if the last status was the lap time check status, the chronograph enters the SPL chronograph time check status, 2 if the last status was the LAP lap time calling status, the chronograph enters the status (reset, time check or time check end status) just before the lap time calling status, 3 if the lap time was called in the lap time status, the chronograph enters the SPL chronograph time check status. 38 39 10. USING TIMER · The timer can be set for 1 minute to 60 minutes in one minute increments. [Initial setting status of the timer] 60 50 40 30 24 18 12 L-TM L-A L TME C 10 20 Indication of set minute(s) Normal position Timer setting position 6 R LAP S [How to set the timer] (1) Press button M to switch the mode to "TMR. " (2) Pull out button M to the timer setting position. (3) Press button C to set timer minute(s) as desired. Each time button C is pressed, the set time (minutes) is shortened by one minute. · Digital display I and the function hand II indicate the set minutes. · Digital display II shows "00. " · If button C is left pressed, it quickens setting of the timer. (4) Press button M to the normal position, and setting of the timer is complete. * If button B is pressed during setting of the timer, the watch comes into the Hand Retractor mode. [How to start time check by the timer] (1) Press button A. [. . . ] If your watch is not water-resistant, take it to your dealer. NOTE: Avoid using solvents (thinner, benzine, etc. ), as they may mar the finish. WARNING: Handling of the battery · Keep the battery out of the reach of small children. If a child swallows the battery, contact a physician immediately. 58 59 CAUTION: Replacing the battery · For replacement of the battery, take your watch to your dealer or Citizen Service Center. [. . . ]