User manual CITIZEN CH-608

[. . . ] If the cuff pressure feels abnormal or you experience any other irregularity while using the cuff, reduce the pressure immediately by pressing the a key and then consult the sales outlet where you purchased the monitor. If you think the measurement is abnormal or if measurement makes you feel unwell, discontinue use and consult your physician. Repeated blood pressure measurement may cause problems such as congestion or swelling in some people. Frequently repeated blood pressure measurements will not give accurate results. [. . . ] Pressing the hook down, pull the cover toward you to open. * If the Blood pressure monitor is left unused for an extended period of time, the batteries should be removed from the compartment. Put the batteries over the battery-pull strap, paying attention to the positive and negative terminal symbols m and , . Fitting the lugs of the cover at the mating recesses of the battery compartment body, push the hook to close the cover. When the icon is displayed, or where the clock is no longer shown or nothing appears in the display, replace the old batteries with two new ones. All two batteries should be changed at once. â· Stored data will not be erased when batteries are changed, while time information will be erased. Make sure to adjust the time setting after changing batteries. Note that they may not last as long as indicated. â· When disposing of used batteries, comply with governmental regulations or environmental public institution's rules that apply in your country /area. Then press the " " and " " in turn to adjust the month, date, hour, minute and confirm the entry. Press the "User-Switching" key to select a memory zone after seeing the display with all digits lighting up. When completed, the systolic pressure, diastolic pressure and pulse rate will be shown simultaneously on the same LCD screen. The values are automatically stored in the pre-designated memory zone. Press the "User-Switching key" to select a memory zone, and press the "M" key to switch from memory to memory with sequence numbers. Clear Values from Memory Press the "User-Switching key" to select a memory zone, then press and hold the "M" key for approximately 5 seconds to clear the data in the predesignated memory zone. Instruction manual are available in another separate pack for option. The heart is a pump that circulates blood throughout your body. Blood is pumped from the heart at a constant pressure into arteries. This pressure is called the arterial blood pressure and represents, in general terms, your blood pressure. Blood pressure is indicated by several kinds of pressures, including the systolic pressure that occurs when the heart pumps blood and the diastolic pressure that occurs when blood returns to the heart. Your blood pressure changes all the time. [. . . ] Always consult your physician for an interpretation of your blood pressure readings and to determine the proper treatment. Weak Battery Symbol: Appears when batteries should be replaced. Hypertension Classification Indicator: Compares blood pressure against guidelines. Wrap the cuff correctly and keep wrist steady during measurement. [. . . ]