User manual CITIZEN CLP521 QUICK GUIDE

[. . . ] sic , pl O ba ns -R rs io ve ct d CD co ru e st lie id in pp Gu ing e su rt at th ta er on -S l ck op ui d ua Q ile an is ta M Th r de er's Fo e Us th EMI COMPLIANCE STATEMENT OR CANADIAN USERS 14. 15. CAUTION : Use shielded cables to connect this device to computers. Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. 16. 27 . Cet équipment produit et utilise l'énergie à radio fréquences et s'iln'est pas installé et utilisé correctment, c'esst à dire en accord strict avec les instructions du fabricant, il risque de provoquer des intérferences avec la réception de la radio et de latélévision. [. . . ] Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners, thinner, trichloroethylene, benzine, ketone or similar chemicals. Instead use a damp cloth for cleaning, when the printer is disconnected from the mains supply. Do not use this product near water or where a chemical reaction can occur such as in a laboratory or where there is a lot of oil, dust, salt or iron particles. Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product and people around it. Slots and openings on the cabinet and the back or bottom are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, do not block or cover these openings. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built-in installation unless proper ventilation is provided. This product should be operated from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. This product is equipped with a three-pronged plug, a plug having a third grounding pin. This plug will only fit into a grounding-type power outlet. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be walked on. Do not pull on the power cord or data cables or keep them under tension. 1 If an extension cord is used with this product, make sure that the total of the ampere ratings 1. [. . . ] Turn OFF the power switches of both the printer and the computer. Connect one end of the interface cable to the interface connector on the back of the printer and secure it with locks or locking screws, where available. Connect the other end of the interface cable to the interface connector on the computer and secure it with locks or locking screws, where available. Large blue-head open lever 6 g. Align the media with the left fixed media guide (2 locations), align the right movable media guide with the media width, and lower the sensor arm. Sensor Adjustment for Specialist Media To detect media with black `registration' marks on the back of the media, use the reflective sensor: In reflective sensor mode, only the lower sensor is used. [. . . ]