User manual CITIZEN CMP-10BT

[. . . ] This printer conforms to the following Standards: Low Voltage Directive 73/23/EEC, 93/68/EEC, EMC Directive 89/336/EEC, 92/31/EEC, 93/68/EEC. This declaration is applied only for 230V model. For Unites States In order to comply with FCC radio-frequency radiation exposure guidance for an uncontrolled exposure, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. [. . . ] For long-time storage, use thermal paper of high storage type or copy it with plain paper copier. Do not put thermal paper near the paper copied by use of ammonia. Avoid putting sweat or grease from your hands on the surface (printed or to be printed) of thermal paper. Store thermal paper in a dark place with average temperature below 25°C and relative humidity below 65% . G Using print paper with a thickness outside the recommended range may cause improper print quality. G With one side of the connector connected to this product, do not touch the metal part of the other connector. G Static electricity may cause breakdown of internal circuit of this product. G Do not leave this product with a cable wound around it for a long time. disconnection or discoloration may result. G Plugging and unplugging the contactor shall be done securely in the correct direction. G Do not use the product at a voltage and frequency other than specified. G Do not use AC adapter other than specified. G Before use, confirm that the power receptacle has sufficient capacity. G Do not connect to the power receptacle where multiple connections are used. G Do not step on, tap, or put any object, on the cable of the AC adapter. G Before connecting or disconnecting AC adapter, turn the printer power OFF. CMP-10 is a compact, full featured portable line thermal printer, which can be used in a large variety of job environments ranging from doorto-door sales through small and mid-sized catering establishments, car-rentals, parking lots, field services to on-board sales on land, sea and air. IrDA/Bluetooth communication with a PDA or similar device is useful for business activities at the point of sale or service. Easily worn on the belt it is a highly efficient device for printing plain text and graphic receipts on demand plus logos, bar codes and other graphic elements. High speed and low noise emission of the line thermal printing mechanism. The large-capacity Lithium-ion rechargeable battery allows an extensive amount of printing with a single charge. When unpacking the package, confirm the availability of: G Printer unit: G Sample paper roll: G AC adapter: G User's manual: 1 piece 1 roll 1 piece 1 copy E (European) model G Belt clip kit 1 set (Belt clip, 2 × screws, 2 × rubber feet) Please refer to the Appendix for how to mount belt clip and rubber feet. [. . . ] Remove the battery cover by (1) pressing the battery cover as shown in the figure, lift it upward. Remove battery pack from compartment and disconnect battery connector from main unit. Insert the battery connecting cable into the opening above the battery connector. Place battery cover back by sliding it from the back of the printer. [. . . ]