User manual CITIZEN PD-04

[. . . ] 4 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Included and Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Included Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] ­ Do not remove nor scratch their external tube. ­ Do not throw them or strike them vigorously. ­ Do not touch their plus and minus terminals with a wire or other metal object. · Do not take apart or modify a rechargeable battery. If a rechargeable battery is taken apart or modified, it will leak, overheat, or crack. Warning · If fluid from a rechargeable battery touches your skin or clothing, there is a danger of it harming your skin, so wash it off with clean water immediately. 8 Safety Instructions Precaution · Do not touch or moisten rechargeable batteries with fresh water or seawater. If a battery is moistened, it will heat up or rust. · Do not use or leave rechargeable batteries in hot places. If a rechargeable battery is used or left in a hot place, it will leak, reducing its performance and service life. · Store rechargeable batteries where they are out of the reach of infants and small children. Be extremely careful that an infant or small child does not take out the rechargeable batteries. · Use a charger that matches the specifications of each type of battery. ­ Do not let perspiration on your hands or oil touch the printed surface of thermal printing paper (surface to be printed or surface that has been printed). ­ When the thermal printing paper will be stored, store it in a dark place where the average temperature is 25C° or less and the humidity is 65% or less. · Roll paper curls as it is ejected from the printer, so be careful to prevent it from entering the single sheet insertion opening. · It may be impossible to assure the printing quality if the paper thickness is 80µm or more. 10 Safety Instructions 7 Precautions when installing the printing paper Precaution · Begin printing only after you have made sure that the printing paper is straight where it is ejected from the printing (thermal) head. If it is not straight, the paper will jam. · To prevent the paper from being bent as it is fed into the printer, make sure that the front end of the paper is as shown below. 11 Included and Optional Accessories Included Accessories After opening the package, confirm that the printer and the following standard accessories have been included. User's Manual (This Volume) Roll Paper (30 mm x 10 m) Size AA Alkaline Batteries (4) Optional Accessories The following optional accessories are available for use with this printer. Purchase as needed. RS-232C Cable (9-pin D-sub type connector) (Part No. PD79901-0S) Roll Paper (30 mm x 10 m) AC Adapter Battery Adapter Battery Adapter Cover Installation Guide AC Adapter Kit (Part No. PD69957-0S) 12 External Appearance and Part Descriptions 8 9 0 1 2 5 7 4 1 POWER LED (POWER: Green) The green indicator lights when the power is on. Additionally, the indicator blinks according to the printer mode (refer to the Error Indication Table). The indicator blinks more slowly when the batteries are running low. [. . . ] Press the FEED button to execute the hex dump. 4 24 Printing Test Internal Menu Settings List Print Function 1 2 3 With the paper loaded, simultaneously hold down the POWER button ( ) and FEED button. When the POWER LED and the ERROR LED are blinking together, release the POWER button ( ). The POWER LED and the ERROR LED alternately blink, slowly at first, then a little faster, then very fast; when they are flashing very fast, release the FEED button. Press the FEED button to begin printing of the internal menu settings. · When the internal menu settings are printed out, the printer automatically turns off. [. . . ]