User manual CLARION MAX2256 INSTALLATION MANUAL

[. . . ] VISUAL/CD/CASSETTE CENTER UNIT WITH DUAL ACTION CENTRE VISUEL/CD/CASSETTE À DOUBLE ACTION UNIDAD CENTRAL VISUAL/DISCOS COMPACTOS/CASETES CON ACCIÓN DOBLE MAX2256 Owner's Guide & Installation Mode d'emploi et guide d'installation Guía del usuario y de instalación Clarion Co. , Ltd. Thank you for purchasing the Clarion MAX2256. Nous vous remercions d'avoir acheté le Clarion MAX2256. Muchas gracias por la adquisición del MAX2256 Clarion. K) Printed in Japan / Imprimé au Japon / Impreso en Japón QZ-2501B 280-6734-00 * Please read this Owner's Guide & Installation in its entirety before proceeding with wire connection and installation. [. . . ] Playback starts automatically. CAUTION Do not place foreign objects in the Cassette Insertion slot or CD Insertion slot because it may cause breakdown. Be careful not to let your fingers get caught in the panel when it turns upward or downward. English 1) Press the TAPE button 1 . The operation panel turns downward and the Cassette Insertion slot 30 appears. 2) Insert a cassette tape into the Cassette Insertion slot 30 with the exposed side of the tape facing right. Playback starts automatically. Stopping (pausing) playback Owner's Guide Press (center) of the ENT button 11 . To resume playback, press (center) of the ENT button 11 again. * After a cassette tape is inserted, the operation panel closes. Adjust the operation panel angle to an appropriate position. When the operation panel angle is stored, it is set to this angle automatically. Cassette Insertion slot 30 Fast-forwarding and rewinding 1) Slide the Up/Down button 11 to (right) to fast-forward the tape. When the end of the tape is reached, the other side of the tape is automatically played back. Slide the Up/Down button 11 to (left) to rewind the tape. When the start of the tape is reached, that side is automatically played back. 2) When the BND button 13 is pressed at a desired track (song), fast-forwarding or rewinding is canceled and playback starts from that point. CAUTION Do not put your hand or fingers into the Cassette Insertion slot or CD Insertion slot, as this may cause a breakdown. Be careful not to let your fingers get caught in the panel when it turns upward or downward. Auto metal function When a metal or chrome tape is loaded, the unit detects the type of the tape and selects the most appropriate equalizer pattern. Ejecting the cassette tape Press the TAPE button 1 or Eject button 29 . The operation panel turns downward so that the tape can be ejected. After ejecting the cassette tape, the operation panel closes automatically. * MTL appears in the display. APC (Auto Program Control) 1) Slide the Up/Down button 11 to (left) twice to fast-forward the tape to the beginning of the current track. Slide the Up/Down button 11 to (right) twice to fast-forward the tape to the beginning of the next track. 2) When (center) of the ENT button 11 is pressed at a desired track, the APC is canceled and playback starts from that point. * When the panel angle is stored, it is set to this angle. * The operation panel can be closed by pressing the Close button 28 . Notes: · Do not leave a cassette tape in the ejected position (the operation panel is turned downward) because it may cause a breakdown. Be sure to remove the cassette tape or insert it and close the operation panel. Do not expose the operation panel to shocks. · 19 Note: Dolby Noise Reduction System Press the Dolby NR button 18 to turn on the Dolby B NR. · When the (center) of the ENT button 11 is pressed at a location that is less than 15 seconds from the start or end of the track, that track may be skipped and the previous or the next track may be selected instead. * NR in the display becomes pink. English Owner's Guide · The Dolby Noise Reduction System is manufactured under license of the Dolby Laboratories Licensing Corporation. · DOLBY, and the double D mark are registered trademarks of the Dolby Laboratories Licensing Corporation. * To cancel the Dolby NR, press the Dolby NR button 18 to turn off the Dolby B NR. [. . . ] The operation panel is not Press CD (eject) button 3 or set the operation set to the maximum angle. Sound skipping noise and The compact disc is dirty. Wipe the compact disc with a soft cloth. The compact disc is severely Replace the compact disc with one that is in scratched or warped. [. . . ]